BirdGuard B10x Series BirdGuard B10x Serie Installation manual Pages 1-7 Installationsanleitung Seiten 9-15 Version 1.3, Min. HW 1.
Installation manual You can always find the www.doorbird.com/support most up-to-date version of the installation manual on Components Contents 1x BirdGuard 1x 433 MHz RFID Antenna 1x 2.
BirdGuard - back 1) Mounting stand thread To connect the mounting stand 2) 433 MHz RFID Antenna thread To connect the external 433MHz RFID antenna 3) 2.4 GHz WiFi Antenna thread To connect the external 2.4GHz WiFi antenna 4) Cable harness To connect power, network and all external components Videos Need help with the installation? Be sure to watch our installation videos which can be found on http://www.doorbird.com/support Each individual step of the installation is clearly documented in the videos.
Step 1: Switching off power Switch off the power to all wires leading to the assembly location, i.e. power supply unit for the BirdGuard etc. Step 2: Determining the assembly location The BirdGuard uses an ultra wide-angle hemispheric lens so that even when the person is a minimum distance of 50 cm (19.68 inches) away from the BirdGuard, a low installation height is sufficient. The lens is therefore not mechanically adjustable. The camera lens should be located at an altitude of at least 125 cm (49.
Step 4: Further connections (optional) If desired, connect additional wires to the installation site of the BirdGuard. The wires or connection options mentioned in this section are optional. Connecting the unit to a network You can connect the BirdGuard to your existing network via WiFi, or Network cable in alternatively use a network cable (Ethernet). For reasons of network accordance with the stability, we principally recommend using a network cable, as WiFi is Cat.5 standard or better.
External speaker The BirdGuard has a contact for connecting an external speaker, e.g. Two insulated wires. horn speaker, siren (two wires). We recommend using the combi horn speaker/siren for BirdGuard (incl. amplifier within the BirdGuard) available separately by Bird Home Automation.
Step 9: Final assembly Screw in the 433 MHz RFID Antenna and 2.4 GHz WiFi Antenna into the desired threads on the back of the BirdGuard. Mount the BirdGuard on the mounting stand. Step 10: Activating the BirdGuard Switch on the power to the wires leading to the assembly location again. You can see whether you have connected the power supply properly from the Diagnostic LED (it lights up once the power has been connected correctly for up to five minutes and continuously in night-vision mode).
Legal notes General remarks 1. DoorBird is a registered trademark of Bird Home Automation GmbH. 2. Apple, the Apple logo, Mac, Mac OS, Macintosh, iPad, Multi-Touch, iOS, iPhone and iPod touch are trademarks of Apple Inc. 3. Google, Android and Google Play are trademarks of Google, Inc. 4. All other company and product names may be trademarks of the respective companies with which they are associated. 5. We reserve the right to make changes to our products in the interests of technical advancement.
BirdGuard D10x Series BirdGuard D10x Serie Installation manual Pages 1-7 Installationsanleitung Seiten 9-15 Version 1.3, Min. HW 1.
Installationsanleitung Die stets aktuelle Version der Installationsanleitung finden Sie unter www.doorbird.com/de/support Komponenten Inhalt 1x BirdGuard 1x 433 MHz RFID Antenne 1x 2.
BirdGuard - Rückseite 1) Montageständergewinde Für den Anschluss des Montageständers 2) 433 MHz RFID Antennengewinde Für den Anschluss der externen 433 MHz RFID Antenne 3) 2,4 GHZ W-LAN Antennengewinde Für den Anschluss der externen 2,4 GHz W-LAN Antenne 4) Kabelbaum Für den Anschluss an das Stromnetz, Netzwerk etc. Videos Sie können die Installation durch unsere Installationsvideos auf www.doorbird.com/de/support begleiten lassen.
schlecht sind oder Push-Nachrichten verzögert oder gar nicht auf Ihrem Smartphone oder Tablet ankommen. High Speed Internet (Festnetz): DSL, Kabel oder Glasfaser Netzwerk: 802.11b/g/n 2.4GHz oder Ethernet Netzwerk, mit DHCP Schritt 1: Strom abschalten Schalten Sie den Strom sämtlicher zum Montageort führenden Leitungen ab, z.B. Netzteil des BirdGuard etc.
Nummern 1, 2, 3 und 6 eines Cat.5 Kabels oder besser benutzt. Es muss zwingend ein Cat.5 Kabel oder besser zum Einsatz kommen, da Netzwerksignale nur über vollständig isolierte, abgeschirmte und verdrillte Kabel übertragen werden können. Wenn Sie PoE als Stromversorgung nutzen, ist die W-LAN Schnittstelle des BirdGuard automatisch inaktiv, die vier Drähte für PoE sind dann gleichzeitig die Datenleitung. Sollte Ihr PoE Switch oder PoE Injektor keinen PoE Standard IEEE 802.
Strom von 1A arbeiten. Der BirdGuard liefert keine Spannungsversorgung, dies erfolgt durch die separate Spannungsversorgung des externen Geräts. Die Spannungsversorgung können Sie der Anleitung bzw. den technischen Daten Ihres externen Geräts entnehmen. Bei Fragen hierzu kontaktieren Sie bitte den Hersteller Ihres externen Geräts. Beispiele für kompatible externe Geräte und einen beispielhaften Anschlussplan finden Sie unter www.doorbird.
Schritt 8: Drähte anschließen Der BirdGuard verfügt auf der Rückseite für ein komfortables und sicheres Anschließen der Drähte über einen farblich markierten Kabelbaum. Nutzen Sie geeignete Stoßverbinder oder Lüsterklemmen, um die mitgelieferten Kabel mit Ihren Drähten zu verbinden. Die von uns beigelegten Stoßverbinder sind wetterfest und verfügen über einen Schrumpfschlauch, der nach der Montage z.B. vorsichtig mit einem Heißluftfön versiegelt werden kann.
Falls Sie Probleme beim Hinzufügen des BirdGuard zur App haben, prüfen Sie bitte, ob der BirdGuard online ist ( www.doorbird.com/de/checkonline ). Sollte diese nicht online sein, prüfen Sie bitte die W-LAN bzw. Netzwerkkabelverbindung des BirdGuard erneut.
Rechtliche Hinweise Allgemeines 1. DoorBird ist ein registriertes Warenzeichen der Bird Home Automation GmbH. 2. Apple, das Apple Logo, Mac, Mac OS, Macintosh, iPad, Multi-Touch, iOS, iPhone und iPod touch sind Warenzeichen von Apple Inc. 3. Google, Android und Google Play sind Warenzeichen von Google, Inc. 4. Alle anderen Firmen- und Produktnamen können Warenzeichen der jeweiligen Firmen sein, mit denen sie in Verbindung gebracht werden. 5.
Space for your notes / Platz für Ihre Notizen
Space for your notes / Platz für Ihre Notizen
Space for your notes / Platz für Ihre Notizen
www.doorbird.