Installation Manual (Pages 2-17) IP DOOR CHIME A1061x Series Installationsanleitung (Seiten 18-34) IP TÜRGONG A1061x Serie VERSION 1.10, MIN. HW 1.
INSTALLATION MANUAL Read these instructions carefully before starting to use any components. Keep the manual so you can refer to it at a later date if required. If you hand over the device to other persons for use, please hand over the operating manual as well. To make things easier we use the term “device” for the product “DoorBird IP Door Chime” and “mobile device” for a smartphone or tablet. You can always find the most up-to-date version of the installation manual on www.doorbird.
Notice: Indicates a situation which, if not avoided, could result in damage to property. Important: Indicates significant information which is essential for the product to function correctly. ENGLISH N OTI C E Note: Indicates useful information which helps in getting the most out of the product. Hazard information WARNING ∙ Mounting, installation and servicing work on electrical devices may only be performed by a qualified eletrician.
WARNING ∙ For safety, approval and licensing reasons (CE/FCC/IC etc.), unauthorized change and/or modification of the device is not permitted. ∙ The device is not a toy; do not allow children to play with it. Do not leave packaging material lying around. Plastic films/bags, pieces of polystyrene, etc. can be dangerous in the hands of a child. ∙ Always lay cables in such a way that they do not become a risk to people and domestic animals. ∙ Voltage is applied to parts within the equipment.
∙ Existing wiring such as chime wiring, etc. may contain high voltage AC electricity. Damage to the device or electric shock could result. Wiring and installation must be done by a qualified eletrician. ENGLISH ∙ Do not put any metal or flammable material into the device. Fire, electric shock, or device trouble could result. ∙ When mounting the device on a wall or ceiling, install the device in a convenient location, but not where it could be jarred or bumped. Injury could result.
WARNING ∙ On devices with intercom, be sure to perform a call test with low audio volume on both intercom devices. A sudden call etc. may arrive causing for example damage to your ear. ∙ If the device does not operate properly, unplug the power supply. ∙ All devices which are not marked as weather-proof are designed for indoor use only. Do not use outdoor. ∙ On devices which are marked weather-proof: Do not spray with high-pressure water. Device issues could result.
∙ On devices with intercom or built-in speaker or built-in microphone or signal transmission functions, keep the wires more than 30 cm (12'') away from AC 100-240 V wiring. AC induced noise and/or device malfunction could result. ENGLISH ∙ Keep the device more than 1 m (3.3') away from microwave, radio, TV, wireless router and any other wireless devices. ∙ Install the device in an area that will be accessible for future inspections, repairs and maintenance.
Transportation N OTI C E When transporting the device, use the original packaging or equivalent to prevent damage to the device. Warranty Information For information about the device warranty, see www.doorbird.
4 5 6 Mounting points To mount the device on a wall or ceiling using countersunk head screws. ENGLISH Back Connection terminal Power supply (15 V DC -; 15 V DC +), Storey-call button (STC), Setup button (SET), LAN/PoE. Cable clamp VIDEOS Need help with the installation? Be sure to watch our installation videos which can be found on http://www.doorbird.com/support Each individual step of the installation is clearly documented in the videos.
STEP 1: SWITCHING OFF POWER Switch off the power to all wires leading to the assembly location, i.e. the door chime, electric door opener, power supply unit, PoE-Switch/ PoE-Injector etc. STEP 2: DISMANTLING THE EXISTING DOOR CHIME Should there already be a door chime on the wall, please do not hesitate to remove it. STEP 3: DETERMINING THE ASSEMBLY LOCATION The device is designed for indoor-use only.
N OTI C E ENGLISH Option 1: Power supply using the power-supply unit (mains adaptor) Two insulated wires are required to power the device by connecting it to the power-supply unit (mains adaptor) supplied with it. These wires are normally already there and are freely accessible once you have removed the previous door chime. You can also connect the power supply without any additional wires to the door chime, the power supply has a 300cm long cable with two insulated wires.
Connecting the unit to a network You can connect the device to your existing network via WiFi, or alternatively use a network cable (Ethernet). For reasons of network stability, we principally recommend using a network cable, as WiFi is sensitive to interference (range, house walls acting as shields, reliability of performance, third party WiFi networks, wireless transmitters causing interference in the area, etc.). The device can be powered by PoE or using the power supply unit provided.
CONNECTOR STC LAN/POE V+ ENGLISH VDC V- DESCRIPTION 15 V DC Power supply, negative pole (-) 15 V DC - NOT IC E Do not power the device simultaneously via the power supply from the power supply unit (mains adaptor) and the power supply via PoE. 15 V DC Power supply, positive pole (+) 15 V DC + STC NOT IC E Do not power the device simultaneously via the power supply from the power supply unit (mains adaptor) and the power supply via PoE.
STEP 10: ACTIVATING THE DEVICE Switch on the power leading to the assembly location again. If you use PoE, make sure to switch on power of the PoE-Switch or PoE-Injector you have connected the device to. N OTI C E Do not power the device simultaneously via the power supply from the power supply unit (mains adaptor) and the power supply via PoE. You can see if the device is powered by checking the Diagnostic-LED, which lights up after about 30 to 60 seconds after the power is connected.
Dimensions: 125 x 119 x 26 mm (H x W x D) 4,92 x 4,68 x 1,02 in (H x W x D) Power Supply: 15 V DC or Power over Ethernet (PoE 802.
LEGAL NOTES General remarks 1. DoorBird is a registered trademark of Bird Home Automation GmbH. 2. Apple, the Apple logo, Mac, Mac OS, Macintosh, iPad, Multi-Touch, iOS, iPhone and iPod touch are trademarks of Apple Inc. 3. Google, Android and Google Play are trademarks of Google, Inc. 4. The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. 5. All other company and product names may be trademarks of the respective companies with which they are associated. 6.
Instructions for disposal Do not dispose of the device with regular domestic waste. Electronic equipment must be disposed e.g. at local collection points for waste electronic equipment in compliance with the Waste Electrical and Electronic Equipment Directive. Publisher Bird Home Automation GmbH Joachimsthaler Str. 12 10719 Berlin Germany Web: www.doorbird.com Email: hello@doorbird.
INSTALLATIONSANLEITUNG Lesen Sie diese Anleitung sorgfältig, bevor Sie die Komponenten in Betrieb nehmen. Bewahren Sie die Anleitung zum späteren Nachschlagen auf! Wenn Sie das Gerät anderen Personen zur Nutzung überlassen, übergeben Sie auch diese Bedienungsanleitung. Die stets aktuelle Version der Installationsanleitung finden Sie unter www.doorbird.com/de/support Zur Vereinfachung der Begriffe verwenden wir „Gerät“ für das Produkt „IP Türgong“ sowie „mobiles Endgerät“ für ein Smartphone/Tablet.
Vorsicht: Weist auf eine gefährliche Situation hin, welche, falls nicht verhindert, zu geringfügiger oder mäßiger Verletzung führen kann. N OTI C E Bitte beachten: Weist auf eine gefährliche Situation hin, welche, falls nicht verhindert, zu Sachschäden führen kann. Wichtig: Weist auf wichtige Informationen hin, die den richtigen Betrieb des Produkts gewährleisten. Hinweis: Weist auf nützliche Informationen hin, die die optimale Verwendung des Geräts unterstützen.
WARNUNG ∙ Öffnen Sie das Gerät nicht. In solchen Fällen erlischt jeder Gewährleistungsanspruch! Für Folgeschäden übernehmen wir keine Haftung! Das Gerät enthält keine durch den Anwender zu wartenden Teile. Im Fehlerfall lassen Sie das Gerät von einer autorisierten Fachkraft prüfen. ∙ Aus Sicherheits-, Zulassungs- und Lizenzgründen (CE/FCC/IC etc.) ist das eigenmächtige Umbauen und/oder Verändern des Gerätes nicht gestattet. ∙ Das Gerät ist kein Spielzeug! Erlauben Sie Kindern nicht damit zu spielen.
∙ Schließen Sie keinen Anschluss am Gerät an eine Netzstromleitung an. Feuer oder elektrische Stromschläge können die Folge sein. ∙ Stellen Sie sicher, dass das Netzkabel nicht beschädigt oder gequetscht ist. Wenn das Netzkabel gebrochen ist, kann es zu einem Brand oder elektrischen Stromschlag kommen. ∙ Nichts mit nassen Händen anstecken oder abziehen. Elektrische Stromschläge können die Folge sein. ∙ Führen Sie kein Metall oder brennbares Material in das Gerät.
WARNUNG - Orte mit Staub, Öl, Chemikalien, Schwefelwasserstoff (heiße Quellen). - Orte, die extremer Feuchtigkeit und Luftfeuchtigkeit ausgesetzt sind, wie Bäder, Keller, Gewächshäuser, etc. - Orte, an denen die Temperatur extrem niedrig ist, wie z. B. in einem gekühlten Bereich oder vor einer Klimaanlage. - Orte, die Dampf oder Rauch ausgesetzt sind (z.B. in der Nähe von Heiz- oder Kochflächen).
∙ Achten Sie darauf, dass das Gerät weder Stößen noch starkem Druck ausgesetzt ist. ∙ Installieren Sie das Gerät nicht an instabilen Halterungen, Oberflächen oder Wänden. Stellen Sie sicher, dass das Material stabil genug ist, um das Gewicht des Geräts zu tragen. ∙ Verwenden Sie bei der Installation des Geräts ausschließlich passende Werkzeuge. Ein zu großer Kraftaufwand mit Werkzeugen kann das Gerät beschädigen. ∙ Verwenden Sie keine chemischen, ätzenden oder aerosolhaltigen Reinigungsmittel.
N OT I C E ∙ Das Gerät wird während eines Stromausfalls außer Betrieb gesetzt. ∙ Bei Geräten mit Gegensprechfunktion oder eingebautem Lautsprecher oder eingebautem Mikrofon kann das Gerät in Bereichen, in denen Antennen von Mobilfunksendern, Radio- oder TV-Sendern in der Nähe sind, beeinträchtigt werden.
KOMPONENTEN Inhalt ∙ 1x Gerät ∙ 3x Stoßverbinder ∙ 1x Steckernetzteil mit vier Landesadaptern ∙ 1x Installationsanleitung ∙ 1x RJ45 Netzwerkkabel (300 cm) ∙ 1x Quickstartanleitung mit Digital Passport ∙ 3x Kreuzschlitz-Senkkopfschraube ∙ 1x Bohrschablone ∙ 3x Dübel Gerät Vorderseite 1 Lautsprecher Großer Breitbandlautsprecher 2 Kabeleinlass Um Kabel in das Gerät einzuführen, falls diese Aufputz verlegt sind 3 Diagnose-LED Um den aktuellen Status des Geräts anzuzeigen Rückseite 4 Montagepunkt
VIDEOS Sie können die Installation durch unsere Installationsvideos auf www.doorbird.com/de/support begleiten lassen. In den Videos wird jeder Installationsschritt einzeln und gut dokumentiert dargestellt. INSTALLATION Alle folgenden Schritte sollten von einem fachkundigen Erwachsenen sorgsam und unter Berücksichtigung sämtlicher geltender Schutzvorschriften durchgeführt werden. Sollten Sie Fragen haben, wenden Sie sich bitte direkt an uns oder einen kompetenten Fachmann.
Drücken Sie die Bohrschablone des Geräts am gewünschten Installationsort gegen die Wand oder die Decke und markieren Sie mit einem Stift die Bohrlöcher. Entfernen Sie die Bohrschablone wieder. Stellen Sie sicher, dass sich hinter den Bohrlöchern keine Leitungen in der Hauswand befinden.
Verwenden Sie ausschließlich das mitgelieferte Steckernetzteil oder das bei uns separat erhältliche Hutschienennetzteil, da diese speziell stabilisiert und mit einer integrierten Audio Störungsunterdrückung ausgestattet sind. Andere Netzteile können das Gerät zerstören oder schlechte Übertragungsqualität verursachen. Durch Verwenden eines anderen Netzteils erlischt auto matisch die Gewährleistung.
SCHRITT 6: WEITERE ANSCHLÜSSE (OPTIONAL!) Führen Sie, wenn gewünscht, weitere Drähte zum Montageort des Türgongs. Die in diesem Abschnitt genannten Drähte bzw. Anschlussmöglichkeiten sind optional. Netzwerkverbindung Sie können das Gerät per WLAN oder alternativ per Netzwerkkabel (Ethernet) mit Ihrem vorhandenen Netzwerk verbinden.
erforderlichen Kabel und Drähte mit dem Gerät über das Anschlussterminal verbinden. Entfernen Sie bitte die Kabel am Anschlussterminal, die Sie nicht benötigen. Entfernen Sie etwa 5 mm der Isolierung am Ende der Drähte, die Sie an den grünen Schraubklemmenblock anschließen möchten. VDC V- ANSCHLUSS STC LAN/POE V+ BESCHREIBUNG 15 V DC Stromversorgung, Minuspol (-) 15 V DC - NOT IC E Kombinieren Sie die Stromversorgung per Steckernetzteil nicht mit der Stromversorgung per PoE.
SCHRITT 10: INBETRIEBNAHME Schalten Sie den Strom der zum Montageort führenden Leitungen wieder an. N OTI C E Kombinieren Sie die Stromversorgung per Steckernetzteil nicht mit der Stromversorgung per PoE. Ob das Gerät mit Strom versorgt ist, sehen Sie anhand der Diagnose-LED. Diese leuchtet nach etwa 30 bis 60 Sekunden, nachdem man die Stromversorgung angeschlossen hat. Das Gerät ist betriebsbereit (Bootvorgang, etwaige Softwareupdates etc.
DIAGNOSE-TÖNE Das Gerät gibt nach etwa ein bis fünf Minuten Töne zur Diagnose aus, nachdem man sie mit dem Stromnetz verbunden hat. TECHNISCHE DATEN Abmessung: 125 x 119 x 26 mm (H x B x T) 4,92 x 4,68 x 1,02 in (H x B x T) Stromversorgung: 15 V DC oder Power over Ethernet (PoE 802.
RECHTLICHE HINWEISE Allgemeines 1. DoorBird ist ein registriertes Warenzeichen der Bird Home Automation GmbH. 2. Apple, das Apple Logo, Mac, Mac OS, Macintosh, iPad, Multi-Touch, iOS, iPhone und iPod touch sind Warenzeichen von Apple Inc. 3. Google, Android und Google Play sind Warenzeichen von Google, Inc. 4. Die Bluetooth® Wortmarke und Logos sind Warenzeichen von Bluetooth SIG, Inc. 5.
neu. Installierte Firmware-Updates können nicht rückgängig gemacht werden. Da es sich bei den Produkten und der Software der Bird Home Automation GmbH nicht um explizit kundenspezifisch entwickelte Produkte handelt, kann ein Kunde ein automatisches Update nicht verwehren, sofern das Produkt mit dem Internet bzw. Server der Bird Home Automation GmbH verbunden ist.
Space for notes / Platz für Notizen 35
www.doorbird.