User manual

32
ENGLISH
LAN IN
RJ45 jack to connect a standard
Network cable Cat.5 or better,
coming from the Internet Router.
PWR
Power Input Diagnostic-LED.
15 VDC IN
Power supply (Input, 15 VDC).
2
3
6
INSTALLATION MANUAL
You can always find the most up-to-date version of the installation manual
on www.doorbird.com/support
To make things easier we use the term „Device“ for the product „DoorBird
Gigabit PoE-Injector A1091“.
COMPONENTS
Contents
 1x Device
 1x Power supply unit
(mains adaptor) with four
country-specific adaptors
 1x RJ45 network cable (300 cm)
 1x DIN-Rail adapter
 2x Phillips countersunk head screws
 2x Dowels
 1x Installation manual
 1x Drilling template
 1x Quickstart guide with
Digital Passport
VIDEOS
Need help with the installation? Be sure to watch our installation videos
which can be found on http://www.doorbird.com/support.
Each individual step of the installation is clearly documented in the videos.
INSTALLATION
All steps below should be carried out carefully by a competent adult, taking
into consideration any applicable safety regulations. Should you have any
questions, please contact us or a competent specialist directly. Please ensure
that all wires used for the installation are undamaged along their entire
length and approved for this type of use.
Network speed and network components
Please ensure that the upload speed of your Internet connection is at least
0.5 Mbps. You can also carry out a speed test at any time via the DoorBird
App. The user experience is only as good as your network speed, network
stability and quality of your network components, such as your Internet router
and WiFi access points or WiFi repeaters. Please also make sure that your net-
work components are not older than two years, have been manufactured by a
well-known manufacturer, and have the latest firmware installed.
Should these requirements not be fulfilled, it may happen, for example that
the performance of audio and video is poor or push notifications are delayed
or do not arrive on your smartphone or tablet at all.
High-speed Internet (via landline): DSL, cable or optical fibre
Network: 802.11 b/g/n 2.4 GHz or Ethernet, with DHCP
STEP 1: SWITCHING OFF POWER
Switch off the power to all wires leading to the assembly location, i.e. the door
station, door chime, electric door opener, power supply unit, PoE-Switch /
PoE-Injector etc.
STEP 2: DETERMINING THE ASSEMBLY LOCATION
The device is IP50 certified (not water-proof). Please make sure to put the
device into an appropriate housing if you want to use it outdoors.
The network cable between the device and the product to supply with PoE
and network data can have maximum length of 80 meters/262 feet.
1
4
5
POE
PoE Diagnostic-LED (Output).
POE + DATA OUT
RJ45 jack to connect a standard
Network cable Cat.5 or better,
going to the product to supply
with PoE and network data.
Screw holes
Two screw holes for mounting the
device on a wall or ceiling.
DEVICE