User manual

54
ENGLISH
4
STEP 3: DOWELS AND SCREWS
You can mount the device permanently on a wall or ceiling using appropriate
screws. Please skip this step if you do not want to mount the device permanently.
Press the drilling template of the device against the wall or ceiling at the
desired installation site and mark the boreholes with a pencil. Remove the
drilling template again. Ensure that no cables are to be found in the wall
or ceiling behind the boreholes.
If the wall of the house is not made of wood, you should drill dowel holes
5 mm in diameter in the wall according to the drilling template and then place
the dowels provided into the boreholes. If the wall of the house is made of
wood, dowels are normally not required. There are special dowels for assembling
the device on an insulating wall, e.g. Fischer insulating dowels. Please check with
your insulating material manufacturer regarding which dowels they recommend.
Press the device on the wall or ceiling, so you can see the boreholes in the wall/
ceiling through the screw holes of the device. Use the Phillips countersunk head
screws provided to position it in the dowels or on the wall to fix the device on
the wall/ceiling.
STEP 4: INSTALLATION
Connect the network cable coming from your Internet to the RJ45 jack „LAN
IN“ of the device. Then connect a second network cable to the RJ45 jack
„POE + DATA OUT“ of the device. Connect the spare end of the network cable
connected to the RJ45 jack „POE + DATA OUT“ to the product you would
like to establish a PoE and network data connection with, e.g. a DoorBird IP
Video Door Station, DoorBird 2-Wire Ethernet PoE Converter (Sender) or an
IP Camera.
A Cat.5 network cable with RJ45 plug or better must be used to connect to
the „LAN IN“ and „POE + DATA OUT“ jacks of the device.
Connect the 5.5 mm DC plug of the Power supply unit (mains adaptor)
supplied with the device into the jack „15 VDC IN“ of the device. Do not plug
the Power supply unit itself into a wall socket yet.
STEP 5: ACTIVATING THE DEVICES
Switch on the power leading to the assembly location again. Then plug the
Power supply unit (mains adaptor) of the device into a wall socket.
The „PWR“ and the „POE“ Diagnostic-LEDs of the device should be active
now. Please check the network cable connections and the power supply if
the Diagnostic-LEDs are not active.
DIAGNOSTIC-LEDS
You can check if the power supply and PoE supply of the device are working
by checking the Diagnostic-LEDs. The Diagnostic-LEDs should be active.
LEGAL NOTES
General remarks
1. DoorBird is a registered trademark of Bird
Home Automation GmbH.
2. Apple, the Apple logo, Mac, Mac OS, Macintosh,
iPad, Multi-Touch, iOS, iPhone and iPod touch are
trademarks of Apple Inc.
3. Google, Android and Google Play are trade-
marks of Google, Inc.
4. All other company and product names may
be trademarks of the respective companies with
which they are associated.
5. We reserve the right to make changes to our
products in the interests of technical advance-
ment. The products shown may also look different
from the products supplied based on ongoing en-
hancement.
6. Reproducing or using texts, illustrations and
photos from this instruction manual in any media
– even if only in the form of excerpts – shall only be
permitted with our express written consent.
7. The design of this manual is subject to copy-
right protection. We do not accept any liability for
any errors or any erroneous content or printing
errors (even in the case of technical specifications
or within graphics and technical sketches).
Product Liability Act
1. All products covered by this instruction manual
may only be used for the purpose specified. When
in doubt, consult a qualified specialist or our sup-
port team.
2. Products that are supplied with voltage (in
particular 110-240 V mains voltage) need to be
disconnected from the power supply prior to
opening them or connecting cables.
3. Any losses or consequential damage caused
by intervention or changes made to our products
or improper handling are excluded from liability.
The same applies to improper storage or external
effects.
4. When dealing with 110-240 V mains voltage
or with mains-operated or battery-operated
products, the applicable guidelines are to be
observed, e.g. guidelines on adhering to the
electromagnetic compatibility; or the low-voltage
directive. The respective work should only be
carried out by a qualified specialist.
5. Our products are in compliance with all
technical guidelines and telecommunications
regulations applicable in Germany, the EU and
the USA.
Publisher
Bird Home Automation GmbH
Joachimsthaler Str. 12
10719 Berlin
Germany
Web: www.doorbird.com
Email: [e-mail]