User manual

Step 9: Final assembly

Screw in the 433 MHz RFID Antenna and 2.4 GHz WiFi Antenna into the desired threads on the back

of the BirdGuard. Mount the BirdGuard on the mounting stand.

Step 10: Activating the BirdGuard

Switch on the power to the wires leading to the assembly location again. You can see whether you

have connected the power supply properly from the Diagnostic LED (it lights up once the power has

been connected correctly for up to five minutes and continuously in night-vision mode). The

BirdGuard is ready for operation (booting up process, any software updates, etc.) once it has emitted

a short diagnosis sound from the integrated loudspeaker. This may last for up to 5 minutes. Should

you not hear a beep, please check the power supply. Please also check whether you have used a

wall-plug power-supply and not PoE and whether you have connected the positive pole and negative

pole to the BirdGuard correctly.

Step 11: Downloading and installing the app

Download the "DoorBird" app by Bird Home Automation onto your mobile device from the Apple

app store or Google Play store. You can always find the most up-to-date version of the App manual

on www.doorbird.com/support

If you use WiFi for connecting the BirdGuard to your Internet router, first go to "Settings > WiFi

Setup" and follow the instructions.

If you have finished the WiFi set-up or have connected the BirdGuard to your Internet router by

means of a network cable, go to "Settings > Add device" and click on the QR code icon in the "User"

field. Scan the user QR code found on the "Digital Passport" that accompanies the BirdGuard.

If you have problems adding the BirdGuard to the App please check if the BirdGuard is online (

www.doorbird.com/checkonline ). If the BirdGuard is not online, please check the WiFi or network

cable connection again.

Since Apple uses very high quality microphones, loudspeakers and digital audio components that are

perfectly in tune with one another, the voice quality with an iPhone or iPad is usually noticeably

better than with an Android smartphone or Android tablet.

Diagnostic-LED

This LED light is only lit up for five minutes after the BirdGuard has been supplied with power (and

continuously at night). It lights up as soon as the BirdGuard is supplied with power.

 Illuminated: Device is powered

Diagnostic-sounds

After around two to five minutes, the BirdGuard emits brief diagnostic sounds after it has been

connected to the power grid.

 1x diagnostic sound: The BirdGuard is connected to the Internet

 2x diagnostic sounds: The BirdGuard is able to communicate with the router, but cannot

access the Internet

 3x diagnostic sounds: The BirdGuard has no connection to the network