User manual

22 23
STEP : DOWNLOADING AND INSTALLING THE APP
Download the “DoorBird” App by Bird Home Automation onto your mobile
device from the Apple App Store or Google Play Store. You can always find the
most up-to-date version of the App manual on www.doorbird.com/support
Go to DoorBird App “Settings > Add device” and click on the QR code icon
in the “User” field. Scan the user QR code found on the “Digital Passport”
provided with the device.
If you have problems adding the device to the App please check if the device
is online ( www.doorbird.com/checkonline ). If the device is not online, please
check the network connection and the power supply of the device.
DIAGNOSTIC-LED
You can see if the device is powered by checking the Diagnostic-LED, which
lights up after about 30 to 60 seconds after the power is connected.
DIAGNOSTIC-SOUNDS
After around one to five minutes, the device emits brief diagnostic sounds
after it has been connected to the power grid.
MOTION SENSOR
The device has a built-in Motion Sensor with 4D Technology. You can use it
for numerous applications, e. g. to send an alarm to a mobile device or to
switch a relay to turn on an outdoor light.
RFID READER
The built-in RFID reader can be used for many applications, e.g. to open/lock
doors or arming/disarming your alarm system. For security reasons, the RFID
reader has a very short range (0 - 3 cm, 0 - 1.18 in), so you must place the
compatible RFID tag (key fob) very close to the RFID reader. You can configu-
re the RFID reader using the DoorBird App.
The RFID reader works only on short distance, for security reasons.
API
The device features a well documented API for third-party integration.
For information, terms and conditions see www.doorbird.com/api
ENGLISH
DOORBIRD CONNECT
The device features many options to integrate it into third-party applications.
For information, terms and conditions see www.doorbird.com/connect
CHANGING THE LABEL OF A CALL BUTTON NAMEPLATE
Applies only to devices with 1 and more illuminated call buttons
with nameplate.
Engraving Service
Engraving service for a modern and clean appearance:
www.doorbird.com/engraving
Please follow STEP 1 to switch off power. We recommend to use a thin slot
screwdriver to remove the cover of the nameplate. We recommend to use
white paper for the label which does not absorb moisture.
CHANGING THE LABEL OF THE INFO MODULE
Applies only to devices with Info Module.
Please follow STEP 1 to switch off power and STEP 2 to open the device. You
can then change the labeling of the Info Module in the inside. We recom-
mend to use white paper for the label which does not absorb moisture.