Instructions

10
EXT, EXT Door opener button, max. 0 V DC/V AC, 0 Ampere. These ports can be used to connect
e.g. a door opener button inside the home. It will trigger the first bi-stable latching relay of
the device (REL1, REL1).
Please make sure to add no voltage on these ports. Extra voltage may destroy
the device immediately.
15 VDC - 15 V DC Power supply input, negative pole (-). Please connect the black wire of the power
supply unit (mains adaptor) supplied with the device here, if you do not power the device
using PoE.
Do not power the device simultaneously via the power supply from the power
supply unit (mains adaptor) and the power supply via PoE.
15 VDC + 15 V DC Power supply input, positive pole (+). Please connect the red wire of the power
supply unit (mains adaptor) supplied with the device here, if you do not power the device
using PoE.
Do not power the device simultaneously via the power supply from the power
supply unit (mains adaptor) and the power supply via PoE.
Only related for devices with call button(s):
4 PIN (SWITCH)
Use the yellow cable to connect the button to the IP Video Door Station.
2 PIN (BELL) We offer feature-rich IP door chimes (e.g. DoorBird A1061W), which can be securely
connected via your network (LAN / WIFI / WAN) to this device. Alternatively you can
connect a conventional door chime using this relay contact.
Switching relay, max. 1-24 V DC/V AC, 1 Ampere. The relay contact can be used to connect
a conventional door chime.
Additional feature: The switching relay blocks temporarily if a visitor keeps the
call button pressed permanently.
The power supply for the door chime must be installed separately. Should you have any
questions, please contact the manufacturer of your door chime. You can find compatible
door chimes at www.doorbird.com/support
Some door chimes operate with 110-240 V DC/V AC. Do not connect such
door chimes to this relay contact. The device is immediately destroyed and
life-threatening injuries can occur.
EXT
EXT
NOTICE
NOTICE
NOTICE
BELL
BELL
Please take care when connecting the cables and wires. Connecting the cables and wires the wrong
way may damage the device. Wires without insolation material must not protrude out of the green
screw connection terminal, it may lead to electrical short and damage the device.
The yellow, green, and red cables that lead out from the side of the Main Electrical Unit must only be
used to connect components certified by Bird Home Automation.
NOTICE
NOTICE