User manual

10) 4D Motion Sensor – Activate

Enable this option to enable the 4D motion sensor of your

device. If the motion sensor is disabled, e. g. when

required by local privacy regulations, no user of the device

can be notified by a push message when movement is

detected.

On the model with display, this function is preset by

default, as the area detection runs through this sensor to

activate the display when someone approaches.

(Models: D21x)

11) 4D Motion – Settings

Here you have the possibility to set a pause between the

alarms (30s to 5min), a distance (~1 to ~10m), the

direction of movement (walking, coming, both) and a

schedule.

This schedule allows you to determine on which days and

at what time, for example. To receive a push message, a

relay is triggered or you receive a SIP call.

For more information, see the menu option „Validation

types/-schedules“.

(Models: D21x)

In the "Button Configuration" area, which only appears

on D21x models with multiple bell buttons, you can assign

the respective buttons to the corresponding users.

12) Button Configuration - Settings

Tap here to get a list of all the bell connections. The bells

in the system are usually connected from top to bottom.

You can give a name to each connected key and create

schedules for messages and actions via the "Validation

types" item.

(Models: D21x with multiple buttons)

13) Button Configuration - History

Here you will find an overview of the last 30 bell activities

with date and time.

(Models: D21x with multiple buttons)

14) Button Configuration - Illumination

Touch to change the illumination of the bell buttons

between „Automatic“; „Always on“, „off“.

(Models: D21x with multiple buttons)