User manual

© by Bird Home Automation GmbH | www.doorbird.com 12
In the Favorites area, you can define settings for SIP and
HTTP calls that start a call-in/call-up in combination with
actions (ringers, RFID, KeyCode).
The favorites are assigned to the individual users and
actions in the corresponding menu items and validity
plans.
21) HTTP Calls
Type here to enter a URL and the corresponding
description.
22) SIP Calls
Type here to enter a SIP address and the corresponding
name.
23) Peripheral Settings
Tap here to add peripheral devices such as our
DoorChime.
24) NTP-Server
Enter the details of an NTP-Server (time server) which the
device should use to sync the current time. The default
server used is: “pool.ntp.org”.
25) Relays
Tap here to set the duration that the relay contact triggers
when pressed in the live view.
26) Info module LED
Touch to toggle the illumination of the Info Module
between "Automatic", "Always on", "off".
(Models: D21x with Info Panel Module)
27) Button Sound
Tap here to select the sound that will be heard on the
device itself when the visitor presses the ring button.
28) IR Light
Tap here to turn off IR Light or to leave it on automatic (will
turn itself on in dark conditions when a motion or ring
event is detected)..
29) Image Sensor
Tap here to change contrast and brightness of your
DoorBird.
30) System diagnostic volume
Tap to change the volume of the system messages.
31) SIP Settings
Tap here to enter the SIP Settings menu.
32) Module Ports
Here you can see which modules are installed on your
DoorBird like e. g. our Infopanel, display or the keypad.
(Models: D21x)