User manual

Administration – SIP Settings

1) Save

This saves your settings.

2) SIP activated

Tap this button to activate SIP functionality.

3) SIP proxy, user and password

Use these fields to enter information from your SIP server

(Proxy, user and password)

4) Call on ring

Enter IP address of the destination device, which will be

called once somebody rings the doorbell

5) DTMF

Activate this function to be able to enter a PIN code on

your SIP device to trigger your door knocker and to turn on

the LED lights.

6) Light PIN

Switch on the light on the DoorBird by via PIN on the

telephone. Always confirm the code on the phone with #.

7) Relays 1 PIN

Switch the relays on the DoorBird by via PIN on the

telephone. Always confirm the code on the phone with #.

8) Allow incoming calls

Activate this function to be able to call the device. You can

specify multiple SIP users.

9) Allowed SIP Users

Enable this function to allow SIP users/devices to call

DoorBird. You can enter multiple SIP users.

10) Noise cancellation

Activate/deactivate the out suppression here. Try the

quality of the connection during setup and check which

setting is best for you.

11) Microphone and speaker volume

You can set microphone and speaker volume during the

SIP call.

12) Last error code

You can use the error code to resolve problems with the

SIP installation. The standard SIP status codes are output

for this purpose.