User manual

© by Bird Home Automation GmbH | www.doorbird.com 18
Administration – IP I/O Door Controller
1) Save
This saves your settings.
2) Device properties
This is where peripheral features are listed.
3) Name
This is the name of the peripheral device.
3) Owner Email Address
Enter your current email address here.
5) Password
This is the password of the peripheral device.
6) Change password
Click here to change the password of the device.
7) Blink on trigger
Use the slider to activate or deactivate the flashing of the
LED on your IP I/O Door Controller.
8) Relays 1 – Settings
Section of the setting options for the relay 1. Individual
setting options are described in points 9) to 11).
9) Mode
Change the switching modes of your controller here.
10) Default position
Indicate whether the relay is open or closed when idle.
11) Duration
Use the slider to set the switching time of the relay.
12) Relays 2 – Settings
The settings for relay 2 are equivalent to relay 1 and points
9) to 11).
13) Relays 3 – Settings
The settings for relay 3 are equivalent to relay 1 and points
9) to 11).
14) Delete
Delete the connection of your DoorBird / BirdGuard to the
IP I/O Door Controller here.