User manual

Administration – IP Door Chime

1) Save

This saves your settings.

2) Device properties

This is where peripheral features are listed.

3) Name

This is the name of the peripheral device.

3) Owner Email Address

Enter your current email address here.

5) Password

This is the password of the peripheral device.

6) Change password

Click here to change the password of the device.

7) Blink on ring

Use the slider to activate or deactivate the flashing of the

LED on your DoorChime.

8) Volume

Use the slider to adjust the volume of your Door Chime.

9) Test on Door Chime

Test the bell volume on the linked Door Chime.

10) Ring Settings

Configure the signal settings of your Door Chime and add

additional signals in this submenu.

11) Add

Here you can add further signals. For systems with

multiple ring buttons or key codes, certain ringtones can

be assigned to individual users, but the "Default" signal

must be deactivated.

12) Delete

Delete the connection of your DoorBird / BirdGuard to the

IP Door Chime here.