DoorKing Part Number PLASTIC FOLDING ARM KIT 1601-083 This kit is designed for the 1600 model barrier gate operators only. Recommended for low headroom applications. Kit Includes: Cable Clamp Cable Attachment Assembly Cable Pre-Crimped Eyelet Locking Turnbuckle Locking Eye Bolt (Connected) Cable Eyelet 2 Plastic Arms Arm Hinge 8 Self Tapping Screws Installation Cut Arms to Length first for the height limitations.
DoorKing Part Number Installing Arms Existing Stud 1601-083 Remove stud from operator housing and assemble as shown. Bolt Head (Inside Housing) o st t Top View of Operator Housing ar cle ub. h Washer (Inside Housing) 3A o H r o t ra e Op ju Ad 2 Install eye bolt into arm Pre-Crimped Eyelet hinge with vise-grips. Attach arm hinge to inner arm with 4 self-tapping screws. Bushing Locknut Hub 3A g in us 3 Install cable. Cable MUST clear hub! 1 Install inner arm on hub.
DoorKing Part Number WOOD FOLDING ARM KIT 1601-084 This kit is designed for the 1600 model barrier gate operators only. Recommended for low headroom applications. Kit Includes: WARNING Cable Attachment Assembly 4 Bolts with Locknuts (Small) Bolt with Bushing and Locknut (Medium) MOVING ARM can cause vehicle damage, serious injury or death. STAY CLEAR of arm at all times.
DoorKing Part Number Installing Arms 1601-084 Installing Cable Attachment Assembly Remove stud from operator housing and assemble as shown. Bolt Head (Inside Housing) r lea oc tt jus .
DoorKing Part Number MODEL 1601 FAN KIT 1601-093 This kit is designed for the 1600 model barrier gate operators only. Recommended for hot and humid climates. An automatic thermostat will control heat and humidity inside operator housing. Threaded Housing Studs (Existing) Kit Includes: Fan Assembly with black and white wires, 5 wire ties, 3 double stick wire tie mounts, 2 plastic wire restrainers and 3 nylon lock nuts.
DoorKing Part Number 1600 115 VAC - 3.3 AMP HEATER KIT 1601-092 This kit is designed for the 1600 model barrier gate operators only. For cold weather climates where temperatures routinely drop below 40°F (4°C). A built-in thermostat will automatically control the temperature inside operator housing.
DoorKing Part Number Installation of Heater 1601-092 Kit Includes: Heater / mounting plate, 2 locknuts, 5 wire ties, 3 double stick wire tie mounts, and 2 plastic wire restrainers. Washer 2 Mount Heater 1 Shut off ALL power to operator. Turn off the DC convenience open power switch on certain operator models first then shut off the AC input power to the operator from the circuit breaker. 3 Route heater wires as shown. Locate existing threaded studs in operator.
DoorKing Part Number ALUMINUM ARM FOLDING KIT 1601-310 This kit is designed for the 1600 model barrier gate operators only. Recommended for low headroom applications. Kit Includes: Cable Clamp Cable Attachment Assembly Cable Pre-Crimped Eyelet Locking Turnbuckle (Connected) Cable Eyelet 2 Aluminum Arms with End Caps Locking Eye Bolt Arm Hinge 8 Self Tapping Screws Installation Cut Arms to Length first for the height limitations.
DoorKing Part Number Installing Arms Existing Stud 1601-310 Remove stud from operator housing and assemble as shown. Bolt Head (Inside Housing) tt jus r lea oc Top View of Operator Housing . hub Washer (Inside Housing) 3A o H r o t ra e Op Ad 2 Install eye bolt into arm hinge with vise-grips. Attach arm hinge to arm with 4 self-tapping screws. Pre-Crimped Eyelet Bushing Locknut Hub 3A 1 Install arm on hub. g in us 3 Install cable. Cable MUST clear hub! Cut off excess cable.
DoorKing Part Number PLASTIC FOLDING ARM KIT 1601-083 This kit is designed for the 1600 model barrier gate operators only. Recommended for low headroom applications. Kit Includes: Cable Clamp Cable Attachment Assembly Cable Pre-Crimped Eyelet Locking Turnbuckle Locking Eye Bolt (Connected) Cable Eyelet 2 Plastic Arms Arm Hinge 8 Self Tapping Screws Installation Cut Arms to Length first for the height limitations.
DoorKing Part Number Installing Arms Existing Stud 1601-083 Remove stud from operator housing and assemble as shown. Bolt Head (Inside Housing) Top View of Operator Housing r lea oc tt jus . hub Washer (Inside Housing) 3A o H r o t ra e Op Ad 2 Install eye bolt into arm Pre-Crimped Eyelet hinge with vise-grips. Attach arm hinge to inner arm with 4 self-tapping screws. Bushing Locknut Hub 3A g in us 3 Install cable. Cable MUST clear hub! 1 Install inner arm on hub.
DoorKing Part Number WOOD FOLDING ARM KIT 1601-084 This kit is designed for the 1600 model barrier gate operators only. Recommended for low headroom applications. Kit Includes: Cable Attachment Assembly 4 Bolts with Locknuts (Small) Bolt with Bushing and Locknut (Medium) Cable Clamp Cable Pre-Crimped Eyelet Bolt with Brass Bushing and Locknut (Large) Cable Eyelet 2 Wood Arms Locking Turnbuckle 2 Hinge Plates Installation Cut Arms to Length first for the height limitations.
DoorKing Part Number Installing Arms 1601-084 Installing Cable Attachment Assembly Remove stud from operator housing and assemble as shown. o Bolt Head (Inside Housing) to ust ar cle ub.
DoorKing Part Number 1601 Manual Release Kit 1601-270 This kit is designed for the 1601 barrier gate operator WITHOUT the convenience open option. It provides an interlock power cut-off switch when manually using crank tool to move the arm up or down. DO NOT install on convenience open models. Kit Includes: Pre-wired Interlock assembly, Double motor pulley, Crank tool, 2 spring clips with lock nuts. Installation Shut off the AC input power to the operator from the circuit breaker.
DoorKing Part Number Manual Operation 1601-270 1. Unlock and remove access door. 2. Remove crank tool from inside access door. 3. Flip interlock assembly door up, power will be disabled from operator. 4. Insert crank tool into motor pulley as shown. 5. Rotate crank tool to manually move operator arm up or down. r oo D ess c Ac ck erlo y Int embl s As r o o D l Too k n e Cra torag S 1601-270-C-5-10 Copyright 2010 DoorKing, Inc. All rights reserved.
