Owner's manual

1819-065-B-4-07
SECTION 4 – OPERATING INSTRUCTIONS
Never allow children to operate or play with any access control device.
4.1 General Instructions
4.1.1 Calling Instructions
When the CALL button is pressed, the system will call the preprogrammed telephone number. If the
line is busy, the system will emit a busy signal. Pressing the CALL button will hang the system up.
4.1.2 Responding to a Call
When communication is established, the call recipient has the option of opening the door or gate by
pressing the programmed tone open number(s) on their touch tone telephone, or they can deny
access to their guest by pressing # on their telephone. If access is granted, the call recipient will hear
a confirmation tone in their handset indicating that the door or gate has opened, then the system will
automatically hang up.
Always press the # key on the telephone if you wish to deny a person access. If you hang up to
deny access instead of pressing #, the telephone entry system will remain on line until its
programmed talk time expires or until it detects dial tone.
Some newer type telephones emit a short tone rather than a continuous tone when their keys are
pressed. This may cause the telephone entry system to not respond to the tone open number. If this
happens, simply press the tone open number twice in rapid succession to open the door or gate.
Page 29