Owner`s manual

9210-065-H-2-13

1.5 Continued - Chain Tray Kit

Tip: Chain tray supporting brackets can be

mounted facing down (as shown on right),

facing up or extended depending on the

chain height and position. For further

information, refer to instructions provided

with the chain tray kit.

Chain Tray

Supporting

Bracket

A chain tray is recommended for gates longer than 20 ft. to support the weight of the chain. DoorKing offers a

chain tray kit in sections to fit any length gate. (DoorKing P/N 2601-270 10 Ft. section)

Chain Tray

Supporting

Bracket

(Facing down)

Chain Tray

Supporting

Bracket

(Facing up)

Weep Hole

Carriage Bolts

Gate

Note: The chain should sag at least

one (1) inch per 10 feet of travel.

Note: All gate types can

have the chain tray

installed on them, V-rail

v-wheel ornamental is

shown here.

1”

10 Ft. Segment

Chain Tray

Segments

Connection

10 Ft. Segment

Installing the Chain Tray Kit

10.5”

4” Minimum Pad

Ground