Operation and maintenance manual

Operating Controls
2-15
DX140R/DX140LCR
14. Power Socket for 12 Volt
This is a power socket for only 12V DC devices.
This socket can be used for charging a cellular phone or
power
ing a small 12V DC electrical device.
Open the cap when using it.
NOTE: This so
cket is designed for small electrical
capacity devices. Do not use this socket for
large electrical capacity devices. Thus, damage
can be avoided.
15. Cigarette Lighter
Push the lighter all the way into the socket and release
your hand. After pushing it in, it will be ejected when it is
heated. If it does not eject after a short time, pull it out and
have it serviced.
NOTE: This ci
garette lighter is for 24V only. Never
connect a 12V electrical device to the lighter.
16. Seat Warmer Switch (Optional)
If the seat is equipped with the optional seat warmer, push
this switch to activate it.
When the seat is warmed, the warmer is automatically
turned "OFF".
O
. In this position, the seat war
mer is turned "OFF".
I. In this position, the seat warmer is
turned "ON".
NOTE: The starter switch must be "ON" with the engine
running, for the heater to operate.
12 V
7 A
FG017015
Figure 24
PWR
FG000030
Figure 25
Figure 26
FG000034
O
I