Operation and maintenance manual

DX140R/DX140LCROperating Controls
2-18
24. Dozer Lever
25. Fuel Heater Switch (Optional)
This switch is used to activate the fuel heater system.
When the switch is activated, the fuel is warmed,
depending upon the temperature of the fuel.
NOTE: If the fue
l temperature is above 5°C (41°F),
heating system is not activated.
O. In this position, the fuel heater system is turned
"OFF".
I. In this position, the fuel heater
system is turned "ON".
NOTE: The starter swit
ch must be "ON".
26. Overload Warning Switch (Optional)
If unit is equipped with an overload warning device, push
this switch to activate it.
O. In this position, the overload warning device is turned
"OFF".
I. In this position, when a load is lifted
that reaches the
machine safe lifting limit, a warning light on the
instrument panel will turn "ON" and a warning buzzer
will sound.
27. Safety Lever
See "Safety Lever" on page 3-12.
Figure 33
FG000033
O
I
Figure 34
FG000032
O
I
WARNING
AVOID DEATH OR SERIOUS INJURY
To prevent injury, do not exceed the rated load
capacit
y of the machine. If the machine is not on level
ground, load capacities will vary. There may be local
government regulations about the use of excavators
for lifting objects. Please observe these regulations.
Lock
Unlock
EX1300566
Figure 35