Operation and maintenance manual

DX140R/DX140LCROperating Controls
2-20
Functional check
When the engine starter switch is turned to "I" (ON) position, all
gauge bands, switch/button indicator lights and warning lights
will turn "ON" and the alarm buzzer will sound about two
seconds.
During this functional check,
a LOGO will appear on the
multifunction gauge in the graphic information area (3 and 4,
Figure 36).
Password Activated
If a password has already been set and the system has been
"LOCKED", the password display will appear on the screen once
the functional check has been completed. Enter the password
into the text area and then engage the starter.
NOTE: Refe
r to "Set Password (Lock and Unlock)" on
page 2-41, for further details.
1. Fuel Gauge
Shows remaining fuel quantity in tank.
BLUE ZONE ( ) - Indicates a normal fuel quantity.
RED ZONE ( ) - Indicates that the fuel level is low.
If the gauge pointer moves into the red zone, the fuel level
s
y
mbol will turn "ON", and be display in the screen. Stop
operation and immediately and add fuel.
NOTE: See "Abnor
mal State Warning Symbols" on
page 2-27, for location of this warning symbol
and others.
Check the fuel level on firm and level ground.
CAUTION
AVOID INJURY
If the password does not match the stored password, the
engine wil
l not start.
EF
FG014483
Figure 37