Operation and maintenance manual

Operating Controls
2-41
DX140R/DX140LCR
Set Password (Lock and Unlock)
Use extreme care when setting the password for starting the
engine. If a mistake is made when entering the number, and the
number is excepted by the system, as being correct, that
number will be the only one that will allow the security system to
be activated or deactivated.
Write your password down and keep it in a safe location.
Password numbers can only use numbers between 1 and 0. The
small number to the lower left of each button on the instrument
panel, indicates the number that will be entered when that button
is pressed.
When the cursor is on "Set Password" press the "SELECT"
( ) button. The set password su
bmenu will appear.
NOTE: Th
e screen can be returned to the main menu by
pressing the "ESC"( ) button (3, Figure 71).
Password inquiry menu will be displayed.
NOTE: The initial p
assword is "1111".
The password can be changed within ten minutes while the
st
arter switch is in "I" (ON) position.
After changing password, be sure to use the changed password.
CH
E
F
CH
FG013662
1
6
2
7
3
8
45
09
Figure 91
1. Language
4. Adjust Display
5. Set Password
2. Set Clock
3. Filter / Oil Info
: UP : DOWN : SELECT
l
L
l
FG013571
MAIN MENU
Figure 92
FG013717
ENTER
PASSWORD
Figure 93
CAUTION
AVOID INJURY
Failure to enter correct password three times, will re
turn
normal display screen, and another attempt will not be
possible for ten minutes.