Operation and maintenance manual

DX140R/DX140LCROperating Controls
2-44
Adjusting Flow Rate
Use "UP" ( ) or "DOWN" ( ) buttons to adjust flow rate.
"UP" ( ) button is used to increase a flow rate.
"DOWN" ( ) button is used to decrease a flow rate.
Pump flow setting is at rated engine speed, for only the output of
one pump.
Pump displacement will vary according to changes in engine
rp
m.
Escape
A. Press flow control button ( , Figure 96) to return to
normal display screen and save the flow rate setting.
B. If there is no adjustment for twenty seconds, the flow
co
ntrol screen will return to the normal display screen.
ESC: CANCEL
FG014885
: APPLY
FLOW CONTROL
Figure 98 Breaker
Flow Control Step Pump Flow Setting (l/min)
0 48.5
1 57
2 66
3 69
4 78.5
5 90
6 96.5
7 106.5
8 108
9 114
10 114
ESC: CANCEL
FG014886
: APPLY
FLOW CONTROL
Figure 99 Shear
Figure 100
ESC: CANCEL
FG014885
: APPLY
FLOW CONTROL