Operation and maintenance manual

Operating Controls
2-59
DX140R/DX140LCR
9. Seat Back-pocket
The seat has a seat back pocket. It is used for storing the
operation and maintenance manual.
10. Left and Right Control Stand
Adjustment
For operator's convenience, the right and left control
stands and seat can slide together, within a 140 mm
(6.3 in)
forward or backward travel distance.
Holding lever (10, Figure 133), raise it up, set the seat to
desired position. Release lever to lock the seat in the
selected po
sition.
11. Air Suspension Seat (Optional)
The operator seat is also available with air suspension for
even better comfort. The switch (12, Figure 134) in the
middle of the seat can be used to adjust the
air cushion. If
the switch is pressed, the seat become harder, and pulling
it out makes the seat softer, when the air is bleed out.
12. Heating the Operator's Seat (Optional)
The air suspension seat can be heated. The switch on the
left control stand is used to warm the seat. When heating is
not needed or seat is warmed, turn the switch to "OFF"
position.
FG014389
11
10
Figure 133
FG000187
12
Figure 134
FG000034
O
I
Figure 135