Operation and maintenance manual

DX140R/DX140LCROperating Controls
2-62
Closing the Window
1. Lower bucket or work tool to ground.
2. Move safety lever (Figure 138) to "LOCK" position, and
stop engine.
3. Holding upper handles (1, Figure 140) of front window with
left and right-hand, pull lock
levers (2, Figure 140) to
release lock.
4. Push window forward, and lower it slowly.
5. When bottom of the window, reaches top of front bottom
wind
ow, push front window to engage lock (2, Figure 139).
6. Check that lock levers are securely latched in lock
position.
Front Bottom Window
The front bottom window can be removed and stored in rear of
cabin.
1. After stowing the front upper window in the cabin ceiling,
remove bottom window (1, F
igure 141) from cabin in
direction of arrow.
2. Set bottom window in rubber holders (2, Figure 142)
behind operator's seat. Secure window with left and right
knob
s (3) with push button (4).
FG014392
1
2
Figure 140
WARNING
AVOID DEATH OR SERIOUS INJURY
Be careful that your hands are not caught in window frame.
FG014393
1
Figure 141
FG014394
4
3
2
Figure 142
WARNING
AVOID DEATH OR SERIOUS INJURY
Never have wet hands when handling a window. Never
drop windo
w or let it come into contact with other
parts of the machine.