Operation and maintenance manual

DX140R/DX140LCROperation
3-40
Rotating Pedal Valve (Optional)
Attachment Rotating by Using the Pedal Valve
1. Pressing end (1, Figure 90) is used to turn clockwise.
2. Pressing end (2, Figure 90) is used to turn
counterclockwise.
NOTE: Befor
e
activating the pedal, be sure to check
the function of the attachment.
Locking the Pedal
When rotating is not needed, the pedal can be locked by using
the pr
op rod (3) locking device.
Locking is completed when the top end of the prop (3) is
positioned into pedal hole.
A. Location for "UNLOCKING".
B, Location for "LOCKING".
Attachment Rotation Using the Left-hand Work Lever
(Joystick)
For a machine equipped with an atta
chment that rotates,
rotation is activated while one of the control buttons is being
pressed on top of the left-hand work lever (joystick).
There are three buttons on top of the left-hand work lever. The
left and r
ight ones are for controlling rotation.
NOTE: The m
iddle button is for the horn.
Left button is for counterclockwise rotation, and the right one is
for clockwise r
otation.
FG000405
1
2
Figure 90
FG000406
3
Figure 91
FG000407
A
B
Figure 92
FG014542
2
1
Figure 93 Left-hand Work Lever (Joystick)