Operation and maintenance manual

Inspection, Maintenance and Adjustment

4-43

DX140R/DX140LCR

5. Clean the outer filter (4, Figure 67) by blowing compressed

air from the inside of the filter towards the outside. Do not

use more

than 205 kPa (30 psi) air pressure.

6. Check outer filter by shinning a light through it. If small

holes or thinner parts are found on the element after

cleaning it, replace the filter.

7. Clean the inside of the air cleaner body and the inside of

the air

cleaner cover. Do not use compressed air.

8. Properly install the air filter and cover.

9. After filter service be sure to install cover with arrow

pointing "UP".

NOTE: If after cleaning the outer filter, the air cleaner

clogged indicator remains "ON", replace the

outer and inner filters. Do not clean inner filter.

HAOC570L

Figure 68

FG000412

Figure 69