Operation and maintenance manual

DX140R/DX140LCRInspection, Maintenance and Adjustment
4-76
The transfer pump is used to transfer fuel from a refueling
source to the fuel tank. A check valve is installed in the inlet
hose to prevent fuel from flowing back from fuel tank to source.
A strainer is installed in inlet hose to prevent any foreign material
from being introduced into transfer pump or fuel tank.
A thermal limiter, built into the motor, will automatically shut off
powe
r if motor is overheating to protect it from being damaged.
WARNING
AVOID DEATH OR SERIOUS INJURY
If there are any sign of leakage while operating transfer
pump, inspe
ct the following components to prevent any
fires or hazardous fuel spills.
• Check all hoses leading to and from the transfer pump.
• Check all hose clamps.
• Check transfer pump inlet port.
Fuel
Fuel Tank
ININ
OUTOUT
1
432 5
FG000161
Figure 124
Reference
Number
Description
1Body
2 Check Valve
3Strainer
4Strainer Cap
5Inlet Hose
Reference
Number
Description