Operation and maintenance manual

Safety
1-61
DX140R/DX140LCR
Feet
1. Load point is the end of the arm.
2. Capacities marked with an asteri
sk (*) are limited by
hydraulic capacities.
3. Lift capacities shown do not exceed 75% of minimum
tipp
ing loads or 87% of hydraulic capacities.
4. The least stable position is over the side.
5. Lift capacities are in compliance with ISO 10567.
Unit: 1,000 Ib
A (ft) 10 15 20 Max. Reach
B (ft)
Reach
25
4.34 * 4.34 * 13.59
20
6.04 * 6.04 * 3.52 * 3.52 * 19.15
15
6.74 * 6.74 * 5.72 * 4.77 3.31 * 3.31 * 22.24
10
11.15 * 11.15 * 9.06 * 7.58 7.51 4.62 3.38 * 3.28 23.90
5
18.13 * 13.3 11.49 * 7.02 7.25 4.39 3.66 * 3.06 24.42
0
19.14 * 12.29 11.16 6.56 7.03 4.19 4.24 * 3.1 23.89
-5
21.32 * 12.05 10.92 6.35 6.91 4.08 5.37 * 3.47 22.22
-10
18.67 * 12.22 10.97 6.39 7.51 4.46 19.09
-15
12.36 * 12.36 * 8.48 * 7.88 13.56