Operation and maintenance manual

Safety
1-63
DX140R/DX140LCR
Feet
1. Load point is the end of the arm.
2. Capacities marked with an asteri
sk (*) are limited by
hydraulic capacities.
3. Lift capacities shown do not exceed 75% of minimum
tipp
ing loads or 87% of hydraulic capacities.
4. The least stable position is over the side.
5. Lift capacities are in compliance with ISO 10567.
Unit: 1,000 Ib
A (ft) 10 15 20 Max. Reach
B (ft)
Reach
25 4.34 * 4.34 * 13.59
20 6.04 * 6.04 * 3.52 * 3.52 * 19.15
15 6.74 * 6.74 * 5.72 * 4.85 3.31 * 3.31 * 22.24
10 11.15 * 11.15 * 9.06 * 7.69 7.53 * 4.7 3.38 * 3.34 23.90
5 18.13 * 13.5 11.49 * 7.13 7.37 4.47 3.66 * 3.12 24.42
0 19.14 * 12.49 11.35 6.67 7.15 4.26 4.24 * 3.17 23.89
-5 21.32 * 12.25 11.11 6.46 7.04 4.16 5.37 * 3.54 22.22
-10 18.67 * 12.42 11.15 6.5 7.64 4.54 19.09
-15 12.36 * 12.36 * 8.48 * 8.01 13.56