Operation and maintenance manual

Safety
1-77
DX140R/DX140LCR
Feet
1. Load point is the end of the arm.
2. Capacities marked with an aster
i
sk (*) are limited by
hydraulic capacities.
3. Lift capacities shown do not exceed 75% of minimum
tipp
ing loads or 87% of hydraulic capacities.
4. The least stable position is over the side.
5. Lift capacities are in compliance with ISO 10567.
Unit: 1,000 Ib
A (ft) 10 15 20 Max. Reach
B (ft)
Reach
25 5.77 * 5.77 * 11.72
20 7.13 * 7.13 * 4.28 * 4.28 * 17.88
15 9.42 * 9.42 * 7.89 * 7.66 7.40 * 4.54 3.88 * 3.88 * 21.17
10 9.89 * 7.14 7.32 4.4 3.84 * 3.37 22.90
5 11.25 6.57 7.08 4.18 4.06 * 3.14 23.46
0 10.87 6.23 6.9 4.02 4.59 * 3.22 22.90
-5 19.16 * 11.81 10.8 6.17 6.87 4 5.66 * 3.69 21.15
-10 11.02 6.37 8.54 5.02 17.69