Service manual

G424F(FE) Service Manual Chapter 3. Engine Mechanical System 37
bolts N•m
Oil pan to cylinder block 18-22
Con–rod bearing cap to con–rod 30-40+40°+45°
Flywheel to crankshaft 35 + 30 ° + 15° 2)
Coolant temperature sensor to thermostat housing 20
Thermostat housing to cylinder head 15
Carrier plate (DIS ignition module) to camshaft housing 12
Relief valve plug to oil pump 45 - 60
Toothed belt cover, lower part to rear toothed belt cover 4
Toothed belt tension roller to oil pump 20
Spark plug to cylinder head 25
Cylinder head and camshaft housing to cylinder block 25 + 180°+ 10° 2)
1. Use new nuts.
2. Use new bolts.
3. Rectum thread before reuse and insert bolts with
screw locking compound (red). The installation
time including the torque check is maximum 10
minutes.
4. Insert bolts with mounting paste (white).