User's Manual

-25-
cards beyond children's reach.
Installation
 Hold the End key for a while to power off the mobile phone
 Push the back cover above the battery and remove it.
 Pull the left battery buckle outward and then lift the battery
away.
 Insert the SIM card into the SIM card slot lightly with the corner
cutting of the card aligning to the notch of the slot and the gold
plate of the card facing download, till the SIM card cannot be
further pushed in.
 With the metallic contacts of the battery facing the metallic
contacts in the battery slot, press the battery down until it locks
into place.
Using code
The mobile phone and the SIM cards support sorts of passwords,
in order to prevent the phone and the SIM cards from being
misused. When you are prompted to input any of the codes
mentioned below, just input the correct code and then press the
OK key.
 Phone lock code
The phone lock code may be set to prevent your mobile phone
from being misused. In general, this code is provided along with
the mobile phone by the manufacturer. The initial phone lock code
is set to 0000 by the manufacturer. If the phone lock code is set,
you need to input the phone lock code when powering on the
mobile phone.
 PIN
The PIN (Personal identification number, 4 to 8 digits) code
prevents your SIM card from being used by unauthorized people.
In general, the PIN is supplied with SIM card by the network
operator. If PIN check is enabled, you need to input the PIN each
time when you power on your mobile phone. The SIM card will be
locked if you input wrong PIN code for three times.
Unlocking methods as follows:
-Input the correct PUK according to the screen tips to unlock the
SIM card.
-Then input the new PIN and press the OK key.
-Input the new PIN again and then press the OK key.
-If the input PUK is correct, the SIM card will be unlocked and the
PIN will be reset.