User's Manual

360SLT2 SMARTLINK
TM
TPMS Tablet User Manual (v1)
Doran Mfg. LLC – 2851 Massachusetts Ave – Cincinnati, OH 45225 – 866-816-7233 – Doranmfg.com
7
The appropriate transceiver is selected and a tire layout screen is displayed. (For 7-axle
transceivers, use arrow to scroll right for more wheel positions) On this screen, the user
can set a global baseline pressure to all programmed tire positions, input/change the
asset ID (Asset ID must be 6-digits), and program sensors on to the transceiver.
The default baseline pressure is set to 100 PSI. The alarm level defaults are 87.5 PSI for
low pressure level 1, 75 PSI for low pressure level 2, and 125 PSI for the high pressure
alert. To set the global baseline pressure, the button is pressed and the newly desired
values are entered. Confirm the pressure levels by pressing the Confirm button and then
the Send Data to Transceiver button is pressed to transfer the new settings and save the
global baseline pressure to the transceiver.
To program a tire sensor, the desired position is pressed. The sensor ID is typed in at the
top of the screen (Sensor ID can also be input through “READ ID” to these LFA sensors).
If the baseline pressure or alert levels need to be customized, it can be done on this
screen as well. After confirming the ID and alarm levels are correct, the data can be sent
to the transceiver and saved by pressing the “SEND DATA TO TRANSCEIVER” button.