Product Manual

Weighing a Patient

1. Press ON/TARE. The scale will turn on and display a zero weight.

2. Place the patient on the scale.

3. When a stable weight is reached the

and

annunciators will be displayed.

The

indicates that the patient’s weight is stable and

indicates that the

weight has been saved to memory.

4. Record the patient’s weight and remove the patient from the scale. The

RECALL button can then be used to display the last weight.

5. The scale will automatically turn off after 5 minutes or the ON/TARE button

can be held to turn off the scale.

Zero Operation

1. Place the item to be zeroed on the scale platform.

2. Press ON/TARE. The scale will turn on and display a zero weight. If the item

is removed, a negative weight will be displayed.

Note: Each time the scale is powered up, the zero point is reset.

3. Place the patient on the scale and the patient’s weight, less the item’s weight,

will be displayed.

1. With the scale on, press ON/TARE.

2. The display will zero when the scale stablizes.

RECALL Operation

With the patent off the scale, press the RECALL button to display the last

patient’s weight. Only weights of 2lb 3.0oz or higher will be held in memory.