Product Manual

16
“SP” Print String Definition for Each Weight Unit:
Pounds
FR”L1” | LF | ? | LF | POL | WEIGHT | LF | lb | LF | GS | LF | ST | LF | POL | WEIGHT2 | LF | kg | LF | P1,1 | LF
Ounces
FR”L1” | LF | ? | LF | POL | WEIGHT | LF | oz | LF | GS | LF | ST | LF | POL | WEIGHT2 | LF | kg | LF | P1,1 | LF
SP, kilograms
FR”L1” | LF | ? | LF | POL | WEIGHT | LF | kg | LF | GS | LF | ST | LF | POL | WEIGHT2 | LF | kg | LF | P1,1 | LF
Grams
FR”L1” | LF | ? | LF | POL | WEIGHT | LF | g | SP | LF | GS | LF | ST | LF | POL | WEIGHT2 | LF | kg | LF | P1,1 | LF
Pounds - ounces
FR”L1” | LF | ? | LF | POL | WEIGHTLB | SP | lb | POL | WEIGHTOZ | LF | oz | LF | GS | LF | ST | LF | POL | WEIGHT2 | LF |
kg | LF | P1,1 | LF
POL = minus sign for negative weight or a space for a positive weight.
WEIGHT = 6 character field plus decimal if needed.
WEIGHT2 = Kilogram weight. 6 character field plus decimal if needed.
WEIGHTLB = pound portion of lb-oz weight.
WEIGHTOZ = ounce portion of lb-oz weight. (WEIGHTLB and WEIGHTOZ total 5 characters
plus decimal)
SP = ASCII space.
ST = MOT. if in motion or four (4) spaces if stable.
CR = Carriage return.
LF = Linefeed
| = Separator, not printed.
Bi-directional Communications:
The scale will respond to the following single letter ASCII commands.
“W” initiates transmission of current weight data (if scale is stable).
“U” changes the displayed weight units.
“Z” zeroes the scale (if in motion, scale will wait until stable, then zero.)
RS232 Pin-outs:
Pin# Function
1NC
2GND
3NC
4RXD
5TXD
6 NC RJ11 (As viewed from rear of scale.)