Product Manual

1
Section 1. Unpacking and Installation
Unpacking:
Before unpacking your Doran scale, please read the instructions in this
section. Your new scale is a durable industrial product, but it is also a
sensitive weighing instrument. Normal care should be taken when
handling and using this product. Improper handling or abuse can
damage the scale and result in costly repairs that may not be covered by
the warranty. If you notice any shipping damage, notify the shipper
immediately. Please observe the following precautions to insure years
of trouble free service from your new scale.
! DO NOT drop the scale.
! DO NOT immerse the scale.
! DO NOT drop objects on the scale.
Carefully remove the scale from the shipping carton. Be sure to retain
all shipping materials in case the scale must be shipped elsewhere.
Installation:
Place the scale on a stable flat surface. Verify that the bubble level
located under the platter shows that the scale is level. Adjust the four
feet to obtain a level condition (bubble in center.)
Electrical Connections:
The PC-400 uses a wall mounted transformer or an internal
rechargeable battery to provide power to the scale. The transformer
requires 115 VAC, 50/60 Hz power. Be sure that the power outlet and
transformer are not exposed to water while the scale is plugged in.
Care & Cleaning:
With reasonable care, this product will last for many years. Here are
some tips to care for your PC-400 Portion Control Scale.
• Hand clean with a damp cloth using mild detergent.
•
Do not wash the scale in a dishwasher – the removable platter is
dishwasher safe.
•
Do not use strong solvents or abrasive cleaners as this can damage
the touch panel or other plastic parts.
•
Do not drop or overload the scale.
•
Do not use sharp objects to press any of the buttons.
•
Always use the PC-400 on a stable, vibration-free surface for best
weighing results.
•
Do not immerse.