Product Manual

7
Section 6. Setup Menus Explained
Resoluton (divisions) Setup Menu
div
Select Scale Capacity (lbs)
2.5
# of scale displayed divisions is 2500.
(default for 5lb and 10lb scales.)
5.0
# of scale displayed divisions is 5000.
10
# of scale displayed divisions is 10000.
(default for 2lb scales.)
Capacity Setup Menu
CAP
Select Scale Capacity (lbs)
2
Scale capacity set to 2.2 pounds
5
Scale capacity set to 5 pounds
10
Scale capacity set to 10 pounds
12
Scale capacity set to 13.2 pounds
20
Scale capacity set to 20 pounds.
Calibration Menu(s)
CAL
Zero Calibration Point
0
Press ZERO to calibrate zero point
CAL
Span Calibration Point
FS
Full scale calibration
Apply full capacity to the scale, except for
the 2.2lb scale, which uses 2lbs, and the
13.2 lb scale, which uses 12lbs.
NOTE: This parameter is only visible after
a zero calibration is performed.
Reset All Parameters to Default Settings?
rst
Default parameters?
n
No. Parameters are not defaulted.
y
Yes. Set all parameters to their default
values when UNITS is pressed.