3246228 TM Bombay Metal Bed Full Bronze Weight Limit: 450 Lb / 204 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/support-home or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. E.L.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
B34324622800 3
A Parts B Replacement Parts, Visit www.dhpfurniture.com/eng/support-home D C E F All in 1 big box! There are inner box(es) that include components required to complete this assembly. Post T944580 Post T944590 Post T944600 Post T944610 Side Rail T938340 Side Rail T938350 X1 X1 X1 X1 X2 X2 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
1 3 2 Hardware Pack 5 4 Hardware Pack #: T3247298-02 5/16" X 3/4" 1/4" X 7/8" X 12 1/4" X 1 3/16" X 16 1/4" X 11/16" X4 X8 1/4" X 1 9/16" X4 6 7 8 1/4" X4 X1 4mm X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 Insert T X 2 into A/B and C/D with . T T B B Correct: Part T penetrating through Part A,B,C&D. Incorrect: Part T NOT penetrating through Part A,B,C&D.
Step 2 F Insert F X 2 into E X 2 with . E Holes on the top side.
Step 3 3.1 Attach H X 2 to sub-assembly E/F x 2 H E G F from previous step with 3.2 Attach G to E X 2 with . . 3.2 3.
Step 4 M This bed offers you 2 options for the height of the bed foundation. To assembly in Higher Position: From STEP 4 to STEP 9. To assembly in Lower Position: From STEP 10 to STEP 15. G Attach M X 2 to G with .
Step 5 Attach sub-assembly E/F from previous step to A, B, C and D with .
Step 6 I 1 6.1 Insert one end of both I into the slot on G as illustrated. 6.2 Attach the other end of both I to H with I and H 6 G 6.1 . I 6.
1 K Step 7 Attach M&K to G with and .
Step 8 E 1 E 1 2 Y 2 Insert P into E&F as illustrated, then lock P into place with Y.
Step 9 S Attach S X 4 to A, B, C & D.
L Step 10 To assembly in Lower Position: From STEP 10 to STEP 15. Attach L X 2 to G with .
Step 11 Attach sub-assembly E/F from previous A step to A, B, C and D with .
Step 12 I 1 12.1 Insert one end of both I into the slot on G as illustrated. 12.2 Attach the other end of both I to H with G H I 12.1 6 and . I 12.
Step 13 K 1 G Attach L&K to G with and .
1 Step 14 E E 1 Y 2 2 Insert P into E&F as illustrated, then lock P into place with Y.
Step 15 S Attach S X 4 to A, B, C & D.
Helpful Hints Weight Limit: 450 Lb / 204 Kg Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your DHP furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: This bed is not intended for use by children under 4 years old. Prohibit jumping and horseplay on this bed.
3246228 NO LO REGRESE A LA TIENDA ! Si le faltan piezas o las que se incluyen est n da adas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Bombay Metal Bed Full Visite www.dhpfurniture.com/spa/support-home o llame gratis al 1-800-267-1739 Bronce Fecha de compra N mero de lote ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
Lea antes de comenzar a ensamblar Llame a nuestro n mero gratuito si necesita asistencia. Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su piso y su producto. El n mero de personas recomendadas para el montaje de este producto es: 2 (sin embargo es recomendable contar con ayuda adicional). Tiempo estimado de ensamble es 1.5 horas. Aseg rese de que todas las partes est n incluidas.
Instrucciones Paso 1 Insertar T X 2 dentro de A/B & C/D con . Paso 2 Insertar F X 2 dentro de E X 2 con . Paso 3 3.1 Una la parte H X 2 con subconjunto E/F x 2 del paso anterior con . 3.2 Una la parte G con E X 2 con . Paso 4 Esta cama le ofrece 2 opciones para la altura. Para el montaje en la posici n m s alta:De Paso 4 al Paso 9. Para el montaje en la posici n m s baja:De Paso 10 al Paso 15. Una la parte MX2 con G con . Paso 5 Una la subconjunto E/F del paso anterior con A, B, C & D con . Paso 6 6.
3246228 NE RETOURNEZ PAS AU MAGASIN ! Si une pi ce est manquante ou endommag e, nous vous exp dierons avec plaisir vos pi ces de remplacement gratuitement. Bombay Metal Bed Full Visitez www.dhpfurniture.
Avant de commencer l'assemblage Si vous avez besoin d'aide, appelez notre service la client le sans frais. Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le plancher et le produit. Nombre de personnes recommand pour l'assemblage: 2 (cependant il vaut mieux toujours d'avoir une main suppl mentaire). Le temps d'assemblage estim est de 1.5 heures. Assurez-vous que toutes les pi ces sont incluses.
Instructions tape 1 Ins rer T X 2 dans A/B & C/D avec . tape 2 Ins rer F X 2 dans E X 2 avec . tape 3 3.1 Attacher H X 2 au sous-ensemble E/F x 2 de tape pr c dente avec . 3.2 Attacher G E X 2 avec . tape 4 Ce lit vous offre 2 options pour la hauteur de lit. Pour l'assemblage dans la position plus haute:De L' tape 4 L' tape 9. Pour l'assemblage dans la position plus basse:De L' tape 10 L' tape 15. Attacher M X 2 G avec . tape 5 Attacher le sous-ensemble E/F de l' tape pr c dente A, B, C & D avec . tape 6 6.