4030939 TM Jordyn Upholstered Daybed Grey Velvet Weight Limit: 400 Lb / 181 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge. Visit www.dhpfurniture.com/eng/support-home or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. E.L.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
B34403093900 3
Parts C D Replacement Parts, Visit www.dhpfurniture.com/eng/support-home O S T This item is packed in 2 boxes! All parts listed on this page are in Box A. If Box B is missing please contact your Retailer. Armrest T944890 Armrest T944900 Wooden Slats T926360 Bracket T393050 Bracket T393060 X1 X1 X 26 X3 X3 There are inner box(es) that include components required to complete this assembly.
Parts A B F E Replacement Parts, Visit www.dhpfurniture.com/eng/support-home This item is packed in 2 boxes! All parts listed on this page are in Box B. If Box A is missing please contact your Retailer. Back Rest T944910 Front Panel T944920 Front/Rear Rail T926280 Center Brace T936370 X1 X1 X2 X1 There are inner box(es) that include components required to complete this assembly.
1 3 2 Hardware Pack 5 4 Hardware Pack #: T4030439-00 1/4" X 3/4" X 18 1/4" X 1 3/16" X 22 1/4" X 1 9/16" X 12 4mm X1 5/16" X 3" X4 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 4 Do not completely tighten the BOLTS, leave 3/4" length exposing. Z C 1.1 Attach Z X 4 to C,D with 1.2 Screw tighten. ; to C,D, don't completely Z Z D C Z 2 Z 2 4 2 2 To avoid fraying the fabric during assembly, please lay the armrests C&D on a piece of cardboard.
Step 2 T A Small holes on slots of (S) and (T) should be facing upward. 1 S Attach S X 2 and T X 2 to A with Attach S,T to B with . . B 1 A S S B T T Holes on top side.
Step 3 Attach E to A with . A 3 E 3 Slat Cap holes on part E should be facing upward.
Step 4 Attach E to B with . Slat Cap holes on part E should be facing upward.
Step 5 B 2 C C S Hang A & B on C & D as illustrated below, T A don't completely tighten the 6 is complete.
Step 6 Attach F to C,D with , then properly tighten all the BOLTS. 2 F C Slat Cap holes on part F should be facing upward.
X X O O Y E O O 7.2 7.1 7.3 F Step 7 7.1 Insert O into X; 7.2 Press X into E, repeat the same procedure for the opposite side. 7.3 Insert ends of both slats O into Y, then press Y into F as illustrated. Repeat the same procedures going backwards for every row of slats.
Helpful Hints Weight Limit: 400 Lb / 181 Kg Move your new furniture carefully, with two people lifting and carrying the unit to its new location. Your DHP furniture can be disassembled and reassembled to move. Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: This bed is not intended for use by children under 4 years old. Prohibit jumping and horseplay on this bed.
4030939 NO LO REGRESE A LA TIENDA ! Si le faltan piezas o las que se incluyen est n da adas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Jordyn Upholstered Daybed Visite www.dhpfurniture.com/spa/support-home o llame gratis al 1-800-267-1739 Gris Fecha de compra N mero de lote ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA.
Lea antes de comenzar a ensamblar Llame a nuestro numero gratuito si necesita asistencia. Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, preferiblemente sobre una alfombra o utilice el cart n del empaque para proteger su piso y su producto. El n mero de personas recomendadas para el montaje de este producto es: 2 (sin embargo es recomendable contar con ayuda adicional). Tiempo estimado de ensamble es 1.5 horas. Aseg rese de que todas las partes est n incluidas.
Instrucciones Paso 1 1.1 Una Z X 4 con C,D con L mites de peso: 400 Lb / 181 Kg ; 1.2 Tornille con C, D, no apriete completamente. Paso 2 Una S X 2,T X 2 con A con . Una S,T con B con . Paso3 Una E con A con . Paso 4 Una E con B con . Paso 5 Colgar A & B en C & D como se ilustra ,no los apriete completamente el hasta que el PASO 6 sea compleatado. Paso 6 Una F con C, D usando , apriete completamente todos los tornillos. Paso 7 7.1 Inserte O en X; 7.
4030939 NE RETOURNEZ PAS AU MAGASIN ! Si une pi ce est manquante ou endommag e, nous vous exp dierons avec plaisir vos pi ces de remplacement gratuitement. Jordyn Upholstered Daybed Visitez www.dhpfurniture.
Avant de commencer l'assemblage Si vous avez besoin d'aide, appelez notre service la client le sans frais. Travailler dans un endroit spacieux et pr s du lieu o l'unit sera utilis e, pr f rablement sur un tapis, ou sur un morceau de l'emballage pour prot ger le plancher et le produit. Nombre de personnes recommand pour l'assemblage: 2 (cependant il vaut mieux toujours d'avoir une main suppl mentaire). Le temps d'assemblage estim est de 1.5 heures. Assurez-vous que toutes les pi ces sont incluses.
Instructions tape 1 1.1 Attacher Z X 4 Limite de Poids: 400 Lb / 181 Kg C,D avec ; 1.2 Viser les la main dans C, D, ne pas serrer completement. tape 2 Attacher S X 2,T X 2 A avec . Attacher S,T B avec . tape 3 Attacher E A avec . tape 4 Attacher E B avec . tape 5 Accrochez A & B C & D comme illustr ,ne serrez pas compl tement les jusqu' tape 6 est termin e. tape 6 Attacher F C,D avec , puis serrez correctement toutes les BOULONS. tape 7 7.1 Ins rer O dans X; 7.