DOREL ASIA Model No: DAYBED DA6312E Espresso UPC CODE: 0-65857-16372-8 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM CARTON) ______________________________ Date of purchase: _______ / _______ / _______ DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge. Tel #: 1-800-295-1980 NEED HELP! E-Mail: das@dorel.
CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL 1-800-295-1980 You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part. Customer Service Department No. 413 12345 Albert-Hudon Boulevard, Suite 100 Montreal, Quebec Canada, H1G 3L1 E-MAIL: das@dorel.
DAYBED DA6312E HARDWARE LIST 1 2 Ø1/4" X 80mm Ø11.8mm X 15mm JOINT CONNECTOR (4mm HEX HEAD) BARREL NUT 8 PCS 8 PCS 3 4 Ø6.
DAYBED DA6312E PARTS LIST A B C LEFT BACK POST RIGHT BACK POST TOP RAIL 1 PC 1 PC 1 PC D E F FRONT / BACK RAIL SLAT SPACE BLOCK 2 PCS 9 PCS 2 PCS
DAYBED DA6312E PARTS LIST G H I SIDE FRAME TOP RAIL SIDE FRAME CENTER RAIL SIDE FRAME SLAT 2 PCS 2 PCS 22 PCS J K L BACK FRAME SLAT BOTTOM RAIL LEFT FRONT POST 11 PCS 1 PC 1 PC M N O RIGHT FRONT POST SIDE FRAME PANEL SIDE FRAME BOTTOM RAIL 1 PC 2 PCS 2 PCS
DAYBED DA6312E STEP 1 Insert wood dowels (4) into ends of side frame top rail (G) and side frame center rail (H). Insert stoppers (7) and side frame slats (I) into the side frame center rail (H) and push down until firmly in place. Attach the side frame top rail (G) to the side frame slats (I). Insert the side frame bottom panel (N) into the grooves of posts (A & L).
DAYBED DA6312E STEP 2 Insert wood dowels (4) into top/bottom rails (C & K) as shown. Attach top/bottom rails (C & K) to the left back post (A) with wood joint connectors (3). Use Hex key (6) to tighten them. Insert barrel nuts (2) into front/back rails (D). Attach front/back rails (D) to the left posts (A & L) with joint connectors (1). Use Hex key (6) to tighten them. Note: Do not fully tighten the bolts. Leaving the bolts loose will facilitate assembly in the following steps.
DAYBED DA6312E STEP 3 Insert wood dowels (4) into top/bottom rails (C & K) as shown. Attach top/bottom rails (C & K) to the right back post (B) with wood joint connectors (3). Insert barrel nuts (2) into front/back rails (D). Attach front/back rails (D) to the right posts (B & M) with joint connectors (1). Use Hex key (6) to tighten all the bolts previously installed.
DAYBED DA6312E STEP 4 Attach slats (E) to front/back rails (D) with flat head screws (5). Use space blocks (F) to space them out evenly. Tighten all flat head screws (5) with a Phillips head screwdriver (not included).
DAYBED DA6312E CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the aximum weights indicated may result in instability or cause possible injury. INTENDED MAXIMUM WEIGHT IS 225LBS That's it ! You've finished assembling your Daybed. DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge.
MODEL #:DA6312E Customer Service PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S). Customer Service Phone Number 1-800-295-1980 Customer Service Fax Number 514-353-7819 Email: das@dorel.