Owners manual

Cherry

Repeat step 2 & 3 to assemble the other chairs.

5-PC COUNTER HEIGHT DINING SET

DA7241,DA7241B

STEP 3

Insert front stretcher (G) to the front legs (E & F).

Insert the left and right stretchers (H & I) into the back frame (C) as shown below.

Attach the assembled legs (E & F) to the seat frame (D) with bolts (4), spring washers (2) and flat washers (1) while

ensuring the side stretchers (H & I) line up with the holes in the front legs (E & F). Use Allen key (6) to install all bolts.

Secure front stretcher (G) and side stretchers (H & I ) to the legs with screws (7) using a Phillips head screwdriver

(not included).

NOTE: Ensure the holes in stretchers are facing up so that the screws (7) will not show once chair is upright. Once

all bolts have been installed, apply a downward force on the chair. This will help all legs to sit flush on the floor.

Fully tighten all bolts installed in step 2.

Repeat Steps 2 & 3 to assemble the remaining chairs.