DOREL ASIA FULL/QUEEN WOOD HEADBOARD Model No.: WM3829 UPC CODE: 0-65857-15760-4 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM CARTON) Date of purchase: _______ / _______ / _______ DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge. Tel # : 1-800-295-1980 E-Mail: das@dorel.
CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL 1-800-295-1980 You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part. Customer Service Department No. 413 12345 Albert-Hudon Boulevard, Suite 100 Montreal, Quebec Canada H1G 3L1 E-MAIL: das@dorel.
FULL/QUEEN WOOD HEADBOARD WM3829 BOLT CAM BOLT CAM LOCK BOLT 1
FULL/QUEEN WOOD HEADBOARD WM3829 PARTS LIST HEADBOARD POST 2 PCS HEADBOARD TOP CROSS 1 PC HEADBOARD BOTTOM CROSS 1 PC HEADBOARD TOP CAP RAIL 1 PC HEADBOARD BOTTOM PANEL 2 PCS HEADBOARD TOP PANEL 1 PC HEADBOARD CENTER SLAT 1 PC
FULL/QUEEN WOOD HEADBOARD WM3829 STEP 1 Insert wood dowels (2) into the ends of headboard center slat (F). Attach cam bolts (3) into the ends of headboard center slat (F). Attach the headboard center slat (F) to headboard bottom cross (G) using cam bolts (3) and cam locks (4) as shown. Use a Phillips head screwdriver (not included) to tighten cam locks (4). Slide the headboard bottom panels (E) into the grooves of the headboard center slat (F) and the headboard bottom cross (G).
FULL/QUEEN WOOD HEADBOARD WM3829 1 PC STEP 2 Attach the headboard center slat (F) to headboard top cross (D) using cam bolt (3) and a cam lock (4) as shown. Use a Phillips head screwdriver (not included) to tighten cam lock (4).
FULL/QUEEN WOOD HEADBOARD WM3829 5 STEP 3 Insert wood dowels (2) into the ends of headboard top cross (D) and headboard bottom cross (G). Attach headboard posts (A) using bolts (1), spring washers (7), and flat washers (6) as shown. Use Hex key (5) to tighten bolts (1). NOTES: headboard top cross (D) and headboard bottom cross (G) may require that they be pulled closer together or further apart in order to allow wood dowels (2) to align with holes in headboard posts (A).
FULL/QUEEN WOOD HEADBOARD WM3829 STEP 4 Insert the headboard top panel (C) into the grooves of the headboard posts (A) and the headboard top cross (D). Push the headboard top panel (C) to secure it into place.
FULL/QUEEN WOOD HEADBOARD WM3829 STEP 5 Insert wood dowels (2) into the ends of headboard posts (A). Attach cam bolts (3) into the ends of headboard posts (A). Attach the headboard top rail (B) to headboard posts (A) using cam bolts (3) and cam locks (4) as shown. Use a Phillips head screwdriver (not included) to tighten cam locks (4).
FULL/QUEEN WOOD HEADBOARD WM3829 NOTE: THE BED FRAME IS NOT INCLUDED AND MUST BE PURCHASED SEPARATELY. THE FOLLOWING ILLUSTRATIONS ARE FOR REFERENCE ONLY. To Assemble a Full Size Bed Attach bed frame (purchased separately) to the inner slots on bed posts (A) using bolts (8), flat washers (6) and locknuts (10). Use hex key (5) and open end wrench (9) to tighten the locknuts.
FULL/QUEEN WOOD HEADBOARD WM3829 NOTE: THE BED FRAME IS NOT INCLUDED AND MUST BE PURCHASED SEPARATELY. THE FOLLOWING ILLUSTRATIONS ARE FOR REFERENCE ONLY. To Assemble a Queen Size Bed Attach bed frame (purchased separately) to the outer slots on bed posts (A) using bolts (8), flat washers (6) and locknuts (10). Use hex key (5) and open end wrench (9) to tighten the locknuts.
FULL/QUEEN WOOD HEADBOARD WM3829 CAUTION : This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish.
MODEL #: WM3829 BAB E C B D Customer Service PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S). Customer Service Phone Number 1-800-295-1980 Customer Service Fax Number 514-353-7819 Email: das@dorel.