User's Manual

ManualsBrandsDorel Juvenile Group ManualsBaby Monitors2.4GHz FHSS Parent Unit

TRUE VIEW

™

COLOR

VIDEO MONITOR

Birth & Up

08028

User Guide

Black 20% Opacity

Black 35% Opacity

1.5

8.4 mm

48.05

LCD VIEW

Myriad Bold 8 pt

Scale: 200%

Scale: 100%

35.76

LCD VIEW

Model No.

Product Name

Concept

Date

08096

Baby Video Monitor

F6066

Rev 1.0

Hardlines Sketch and Rendering Template

5.21.08

Property of Dorel Juvenile Group

Video Display

PMS 280C

Zoom Level Setting Screen

12/31 12:20PM 72 F

Zoom In/Out function –

From the outer level (not pressing the select Key), press the up arrow or Zoom in key. Video will zoom in to x2.

Pressing up arrow or Zoom in button again will zoom to x4.

Pressing the down arrow or Zoom Out Button will Zoom out from x4 to x2 to normal.

If this button is pressed without zoom already done, it will give feedback of ZOOM x1 Only.

Menu bar also display the correct setting at all times. (Not shown in these images.)

Will the zoom show up at bottom

02.03.09

Video Display

At Safety 1st, we're not only about safety, we're

also about your satisfaction. If you have any

questions, please call our Consumer Relations department and let us help.

We want to hear from you. 1-800-544-1108 or email us at consumer@safety1st.com.

WARNING:

Please read the following instructions and

warnings carefully. Keep these instructions for

future reference. Tools needed: Flat Head Screwdriver (not included)

Prepress: please

make image

greyscale

Summary of content (11 pages)

PAGE 1
TRUE VIEW™ COLOR VIDEO MONITOR Birth & Up 08028 User Guide Out function – 12/31 12:20 PM 72 outer level (not pressing the select Key), press the up arrow or Zoom in key. Video will zoom in to x2. Video up arrow or Zoom in button again will zoom to x4. the down arrow or Zoom Out Button will Zoom out from x4 to x2 to normal. ton is pressed without zoom already done, it will give feedback of ZOOM x1 Only. r also display the correct setting at all times. (Not shown in these images.
PAGE 2
IMPORTANT! DANGER! To prevent electric shock, NEVER use the Transmitter or Receiver near water, such as a bathtub, sink, laundry tub, in a wet basement, etc. WARNING! To prevent strangulation with power cord, never place transmitter within reach of child. Important! • Please read all warnings and assembly instructions carefully before using the video monitor. • Parent Unit is a receiver. Baby unit is a transmitter.
PAGE 3
PARTS B K A M H N D P F O E C J I G L Parent Unit 2 AC Adapters Baby Unit AAA Rechargeable Battery Pack (already installed in Parent Unit) Parent Unit A Video Screen B Sound Light Bar – Shows your baby’s sounds C Video Screen On/Off Button D Power On/Off Button E More Bright/Scroll Right F Less Bright/Scroll Left G AC Adapter Jack H Volume Control I Belt Clip J Speaker K L M N O P Camera Lens Base Power On/Off Button Microphone A/C Adapter Jack Nighttime Viewing Lights Baby Unit For more he
PAGE 4
QUICK START Plug in here. 1 Plug in here. 2 Prepress: please make image greyscale and clip 1 Connect AC adapter to the side of the Parent Unit. 2 Connect AC adapter to the back of the Baby Unit. 3 Plug Parent Unit and Plug Baby Unit into wall to charge or to operate AC power. Power Up Press Power button for one second, LED ring will light up and stay lit as product is on. Video will boot up in following sequence: Safety First Screen for 3 seconds 48.05 LCD VIEW Power on here. 4 Power on here.
PAGE 5
Press Power button for one second, LED ring will light up and stay lit as product is on. Video will boot up in following sequence: Safety First Screen for 3 seconds 48.05 LCD VIEW PMS 877C PMS 130C 35.76 LCD VIEW QUICK START Power Up Scale: 100% Scale: 200% Model No. Product Name Concept Date 08096 Baby Video Monitor Safety First Screen 02.03.09 Hardlines Sketch and Rendering Template 5.21.08 F6066 Rev 1.0 Property of Dorel Juvenile Group • Place the Baby Unit 4 to 6' (1.
PAGE 6
USING YOUR MONITOR SOUND LIGHT BAR Video Display The sound light bar will illuminate red from left to right as baby gets louder. Sound Light Bar Middle Volume djust – djust is8.4 shown mmon a window that pops up on the bottom. away 3 seconds after last button press. bar. tthe volume status. up or down side of the volume knob brings up Video the volume bar. Display Video Display Video Display ss does1.5 not change volume but gives user indication of current volume status. light up 1 through 8 bars.
PAGE 7
Less Bright/Scroll Left More Bright/Scroll Right Video Display st button press. Video Screen On/Off Button brightness. deo will darken one level. get to MAX brightness. BRIGHTNESS 1-8. Brightest mm USING YOUR MONITOR CONTROL PANEL Video Display e Adjust – e adjust is shown on a window that pops up on the bottom. es away 3 seconds after last button press. ng the up or down side of the volume knob brings up the volume bar. Scroll left/right for desired brightness setting.
PAGE 8
NIGHT VISION/BATTERY USE NIGHT VISION Night Vision lets you see the baby in a darkened room. The video display during this time is in black and white. For best view of your baby in a dark room, increase brightness control until desired brightness is achieved. Battery Icon – Battery Icon – Video Display ay 3 seconds after last button press. When Battery is charged, Whenshow Battery outline is charged, and inside show asoutline Black battery and inside as Black battery nit is set at medium brightness.
PAGE 9
1 1 CHANGING BATTERIES [Figure 1 – Unscrewing battery covers] Unscrew battery covers (Figure 1) to remove and insert 4 AAA alkaline batteries in the camera (optional). Rechargeable battery pack is included in the Parent’s unit. Secure each battery cover with the screw. Contact Consumer Relations at 1-800-544-1108 to order a new battery pack. Use reference number 08096.
PAGE 10
TROUBLESHOOTING TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION - Adjust the volume - Volume is too low Unit has no sound/picture Low Battery LED turns on, unit emits beeping sound - Sound is off [symbol] - Out of range - Batteries are low - Bring Parent Unit closer to Baby's Unit - Press [View icon] and hold for 2 seconds - Recharge/replace batteries or use AC adaptor - Push the button on the front of Receiver to the ON position On/Off button does not illuminate - Unit is not turned on - Batteri
PAGE 11