User's Manual

5
Installing Your Quick Connection Two Way Monitor
• To prevent entanglement, only mount the Child Unit in a location where it
and its AC adapter cord are OUT OF REACH OF CHILDREN.
• DO NOT mount the Child Unit directly above heating vents, other heat
producing sources or in direct sunlight.
• To prevent entanglement and overheating, NEVER use an extension cord.
WARNING
2
To Set Up Your Child Unit:
1
1. Locate the Child Unit and its AC
adapter. Connect the AC adapter
into the back of the Child Unit.
CAUTION: DO NOT use an adapter
that did not come with this product.
Child Unit
AC Adapter
Door
2a
Cord
Exit
3
4
2. Wrap the excess cord onto built in
cord shortener (Figure 2). Allow
enough cord to reach the outlet
and connect the AC adapter into a
power outlet. Allow the cord to exit
the hole and close the door.
08041 Quick Connection 10/9/03 11:25 AM Page 5