User's Manual

6
Installing Your Quick Connection Two Way Monitor
1a
3 AAA
Batteries
To Set Up Your Parent Unit:
1
NOTE: The Parent Unit may use either
the AC adapter or batteries. When
plugged in, the AC adapter will be the
source of power.
1. For AC Power Use: Locate the
Parent Unit and its AC adapter.
Connect the AC adapter into the side
of the Parent Unit. Connect the AC
adapter into a power outlet (Figure1).
CAUTION: DO NOT use an adapter
that did not come with this product.
For Battery Use: Locate the center
screw at the back of the Parent
Unit. Unscrew the screw. Pull off
the battery door and insert three
AAA batteries (see positive and
negative diagram on the Parent
Unit). Secure the door with the
screw (Figure 1a).
NOTE: If desired, slide the belt clip
over your belt.
Parent Unit
AC Adapter
Battery Door
Screw
• When using batteries, check batteries regularly. Amber LED indicates the
batteries are low. DO NOT rely on Parent Unit when batteries are low.
CAUTION
Choose a Location:
3
4
• For best sound quality place the Child
Unit 4 to 6' (1.5 to 2 m) away from
the child.
• Use the Parent Unit far enough
away from the Child Unit so as not
to get feedback.
• D O NOT use the Parent Unit more
than 1000' (304.8 m) away from
the Child Unit.
Parent Unit
Child Unit
up to 1000'
IMPORTANT: When choosing a location to set up your Child Unit and Parent Unit
follow these guidelines:
08041 Quick Connection 10/9/03 11:25 AM Page 6