User's Manual

For more help and resources, call 1-800-544-1108 or visit www.safety1st.com 54
Parent Unit/Receiver Baby Unit/Transmitter
Parent Unit/Receiver (Audio Only)
DD
AC Adapters (3)
CC
Rechargeable
Battery Pack
A
B
C
D
E
F
G
H
I
J
K
T
S
U
V
W
X
Y
Z
AA
BB
CC
DD
N
M
O
P
Q
R
L
Parent Unit (Receiver)
Zoom Control Button
3.5 inch Video Screen
Link Indicator
Sound Lights (5 LEDs)
Video On/Off Button
Brightness Control Button
Volume Control Button
Speaker
Power On Indicator
Power On/Off Button
AC Adapter Jack
Baby Unit (Transmitter)
Camera Lens
Power On Indicator
Power On/Off Button
Nighttime Viewing Lights
Microphone
AC Adapter Jack
(on back of unit)
Battery Compartment
(4 AA batteries,
not included)
Parent Unit (Audio only)
Sound Lights (5 LEDs)
Link Indicator
Power On/Off Button
Speaker
Antenna
Volume Control Button
Power On/Low Battery Indicator
AC Adapter Jack
Belt Clip & Carry Loop
Battery Compartment
(for rechargeable battery)
Rechargeable
Battery Pack
AC Adapter (3)
B
A
C
D
L
M
N
P
O
Q
S
T
U
V
W
X
Y
Z
AA
BB
Features & Components
Installing & Charging Batteries
CAUTION!
DO NOT mix old and new batteries.
DO NOT mix alkaline, standard (carbon zinc), or rechargeable (nickel-cadmium) batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Exhausted batteries are to be removed from the unit.
Keep batteries out of child’s reach. Swallowing a battery could be fatal.
Used batteries should be disposed of properly.
Do not dispose of batteries in fire - they may explode or leak and cause injury.
Remove batteries when stored for long periods of non-use.
DO NOT use monitor system in portable mode when batteries are low.
Ensure that the battery compartment is completely secure after replacing batteries.
R
G
H
I
J
K
F
E
Battery Installation & Use:
(Rechargeable Battery for Parent Unit)
IMPORTANT:
Parent Unit will not operate unless rechargeable battery pack is installed first.
To maximize battery life, charge a new rechargeable battery pack in Parent Unit for 12+ hours
before first use. You may operate Parent Unit with an AC adapter while charging batteries.
BATTERY INSTALLATION:
Move belt clip out of way. Unscrew battery cover and remove from Parent Unit (Figure 1).
Align connectors of the Parent Unit and rechargeable battery pack ((Figure 2).
Plug together until you feel a click (Figure 3).
Place rechargeable battery pack inside Parent Unit and tuck in the connected wires (Figure 4).
Secure battery cover with its screw; ensure that no wires are pinched.
To order a new rechargeable battery pack, contact Consumer Relations at 1-800-544-1108.
Use reference code number 08180.
Tool Required:
Flathead Screwdriver
Figure 1
Component Required:
Rechargeable
Battery Pack
Figure 2 Figure 3 Figure 4