User's Manual

For more help and resources, call 1-800-544-1108 or visit www.safety1st.com 98
Using Your Monitor
Using Your Monitor
POWER ON/OFF BUTTON
Power On/Off Button is on the right side of Parent Unit.
To power on, press and hold button until Power LED
illuminates and Safety1st logo appears on screen. To
power off, press and hold button until Safety1st logo
appears and Power LED powers off.
LOCK SCREEN/UNLOCK SCREEN
The Lock Screen function is provided to prevent
accidental adjustments to the view. Touch the
touchscreen once to bring up Lock Screen. Lock
Screen appears. Touchscreen is disabled except
for Lock Icon and Quick Pan Button. Press the
Lock Icon for 2 seconds to unlock screen.
TRI-COLOR SOUND LIGHTS (5 LEDs)
As baby’s voice gets louder, the sound lights will
illuminate from 1 light up to 5 lights. Low sound is
one LED (green) illuminated and rises incrementally
as baby’s noise level increases until all 5 LEDs are
illuminated (green – yellow – red).
AUTO-ROTATION SCREEN
Touchscreen self adjusts to portrait or landscape
orientation. You can adjust the chosen view by
rotating the Parent Unit by hand.
ZOOM
Touch the Zoom Icon, zoom overlay screen appears.
To zoom: Tap the “+” or “-“ zoom slider button to
zoom incrementally, or press and hold the “+” or “-“
zoom slider button to zoom in continuously to
maximum zoom. Press “Check” button to confirm
and return to prior screen. Adjusted status
appears in status bar.
Quick Pan
Button
Lock
Button
PAN & TILT
Touch the Pan Icon, pan arrows and pan overlay
screen appear.
To Pan: Tap the pan arrows (up, down, left or right) to
pan the view of your baby. Image will adjust incrementally,
or press and hold the pan arrow to pan continuously to
maximum pan range. Blue bar will appear and pan arrow will
vanish when end of view has been reached. Press “Check”
button to confirm and return to prior screen.
BRIGHTNESS
Touch the Brightness Icon, darken/brighten
overlay screen appears.Tap the “darken” or
“brighten” slider button to adjust brightness
incrementally, or press and hold the “darken” or
“brighten” slider button to adjust continuously to
maximum level. Brightness slider button will move
as image is adjusted. The “darken” and “brighten“
buttons will darken when end of brightness range
has been reached. Press “Check” button to confirm
and return to prior screen.
STATUS BAR
The Status Bar is visible in Lock Screen mode,
and for the first 8 seconds of viewing mode.
Battery charge status, link to camera status,
zoom, camera, temperature, scanning status
(auto-scan/manual scan) and time set in status
bar corresponds to current camera activated.
Battery Link
Zoom
Add
Camera
Temperature
Camera
Scan Status
Time
Parent Unit (Video/Receiver): Parent Unit (Video/Receiver): (continued)