Instruction manual

26
25
With one hand at belt
path,push and pull the
child restraint from side
to side, forward and back.
If the vehicle belt does
not loosen,the child
restraint should be
secure.
If vehicle belt loosens,
repeat all steps. Check
seat belt use in your
vehicle owner’s manual
and review the “Locking
Clip Installation” section
or call DJG Consumer
Relations for help.
8
WARNING
!
Use of this child restraint in any vehicle
where the lap or lap/shoulder belt cannot
be tightened securely can result in serious
injury or death to the child.
Rear Facing Child Restraint Installation with UAS Belt:2.3-14 kg (5-30 lbs.), 48-81 cm (19-32 in.)
UAS Belt
Rear-Facing Child Restraint
Installation with UAS Belt
Note:Fasten tether
hook to recline
stand’s tether hook
storage anchor.
• Check vehicle owner’s
manual for UAS belt use
with a child restraint.
• Do not use the
vehicle seat belt when
using the universal
anchorage system (UAS).
WARNING
!
Never place a child in front of an active
frontal airbag in the rear-facing position.
Death or serious injury can occur.
1
To thread the UAS belt,
put belt end with hook
and adjuster through the
forward-facing belt path.
Reach under pad,pulling
UAS hook and adjuster
between right harness
slot and buckle strap and
out the rear-facing belt
path slot.
2
Right
Harness
Slot
Buckle
Strap
continued on next page.
4358-3951B Can Scenera Eng 6/20/07 8:48 AM Page 31