DOREL ASIA Model No: QUEEN METAL BED DA3285 UPC CODE: 0-65857-16539-5 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM CARTON) ___________________ Date of purchase: _______ / _______ / _______ DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge.
CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL 1-800-295-1980 You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part. Customer Service Department No. 413 12345 Albert-Hudon Boulevard, Suite 100 Montreal, Quebec Canada H1G 3L1 E-MAIL: das@dorel.
QUEEN METAL BED DA3285 Parts List A B HEADBOARD TOP 1 PC D1 C HEADBOARD BOTTOM 1 PC D2 E SIDE RAIL (WITH 1 BRACKET) SIDE RAIL (WITH 2 BRACKETS) 2 PCS 2 PCS F SUPPORT LEG 6 PCS FOOTBOARD 1 PC SLAT 3 PCS
QUEEN METAL BED DA3285 Hardware List 1 2 3 M8 x 19mm M8 x 25mm M8 x 51mm HEX SOCKET HEAD BOLT 10 PCS HEX SOCKET HEAD BOLT 8 PCS HEX SOCKET HEAD BOLT 12 PCS 4 5 6 Φ8.5mm INSIDE DIAMETER: Φ8.5mm OUTSIDE DIAMETER: Φ16mm INSIDE DIAMETER: Φ8.
QUEEN METAL BED DA3285 STEP 1 ● Attach the headboard top (A) to headboard bottom (B) with hex socket head bolts (1), spring washers (4) and metal flat washers (5). Use Allen Key (8) to tighten bolts. 8 1 4 5 STEP 2 ● Attach the side rail (D1) to side rail (D2) with hex socket head bolts (1), spring washers (4) and metal flat washers (5). Use Allen Key (8) to tighten bolts.
QUEEN METAL BED DA3285 D2 & D1 STEP 3 ● Attach the assembled side rails to the headboard bottom (B) and footboard (C) with hex socket head bolts (2), spring washers (4), metal flat washers (5) and rubber flat washers (6). Use Allen Key (8) to tighten bolts. NOTE- The side rails must be attached as shown in the below photo so that the metal brackets face inside the bed frame D2 D1 D1 D2 STEP 4 ● Attach the support legs (F) to the slats (E) with hex socket head bolts (3).
QUEEN METAL BED DA3285 STEP 5 ● Place the slats (E) on the metal brackets of the side rails (D1&D2). Secure using hex socket head bolts (3), spring washers (4), metal flat washers (5) and nuts (7). Use Allen Key (8) & Allen Wrench (9) to tighten bolts and nuts. Ensure that the bed lies evenly on the floor by turning the adjustable levelers underneath support legs (F) clockwise.
QUEEN METAL BED DA3285 CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. Dust this item regularly with a soft, lint-free cloth to prevent soil build up. Wipe with a soft, damp cloth if necessary. Do not use abrasives, cleaners, or polish on the metal frame as this may damage the finish.
MODEL #: DA3285 Customer Service PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S). Customer Service Phone Number 1-800-295-1980 Customer Service Fax Number 514-353-7819 Email: das@dorel.
