DOREL ASIA Model No: 5-PC Dining Set DA7239 UPC CODE: 0-65857-16970-6 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM CARTON) _____________________________________ Date of purchase: _______ / _______ / _______ DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge.
CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL 1-800-295-1980 You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part. Customer Service Department No. 413 12345 Albert-Hudon Boulevard, Suite 100 Montreal, Quebec Canada H1G 3L1 E-MAIL: das@dorel.
5-PC Dining Set DA7239 HARDWARE LIST 1 2 Ø5/16" X 23MM NUT 8 PCS 3 FLAT WASHER 8 PCS 4 Ø5/16" X 19MM Ø5/16" X 11MM FLAT WASHER 36 PCS SPRING WASHER 44 PCS 5 6 Ø5/16" X 1-1/2" Ø5/16" X 3" BOLT 4 PCS BOLT 16 PCS 7 8 Ø5/16" X 2-1/4" Ø4 X 38MM BOLT 16 PCS WOOD SCREW 16 PCS 9 10 ALLEN WRENCH 1 PC ALLEN KEY 1 PC
5-PC Dining Set DA7239 PARTS LIST A B TABLE TOP TABLE LEG 1 PC 4 PCS C D BACK FRAME SEAT FRAME 4 PCS 4 PCS E F SEAT CUSHION CHAIR LEG 4 PCS 8 PCS
-PC Dining Set DA7239 STEP 1 With the help of another person, place table top (A) upside down on a clean smooth surface. Attach table legs (B) to table top (A) with nuts (1), spring washers (4) and flat washers (2). Use Allen wrench (9) to tighten nuts (1). Turn the table upright.
5-PC Dining Set DA7239 STEP 2 Attach seat frame (D) to back frame (C) with bolts (6), spring washers (4) and flat washers (3) through the corners of seat frame (D). Secure the center of seat frame (D) to back frame (C) with bolt (5), spring washer (4) and flat washer (3). Use Allen key (10) to install the bolts. NOTE: Do not fully tighten the bolts. Leaving them loose will facilitate assembly in the following steps.
5-PC Dining Set DA7239 STEP 3 Attach the legs (F) to seat frame (D) with bolts (7), spring washers (4) and flat washers (3). Use Allen key (10) to tighten the bolts. NOTE: Tighten all the bolts installed in previous steps.
5-PC Dining Set DA7239 STEP 4 Attach seat cushion (E) with wood screws (8) as shown below. Use a Phillips head screw driver (not included) to tighten all wood screws (8). Turn the chair upright. NOTE: Once all bolts have been installed, apply a downward force on the chair. This will help all legs to sit flush on the floor. Repeat steps 2 - 4 to assemble the remaining chairs.
5-PC Dining Set DA7239 CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. Product Maximum W eight 100 lbs That's it ! You've finished assembling your dining set. DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge.
MODEL #: DA7239 Customer Service PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S). Customer Service Phone Number 1-800-295-1980 Customer Service Fax Number 514-353-7819 Email: das@dorel.