User's Manual
Table Of Contents
- 1 About this manual
- 2 Grouped safety messages
- 3 Product description
- 4 Design and Function
- 5 Installation
- 6 Start-up
- 6.1.1 Service switch
- 6.1.2 Cold start
- 6.1.3 Starting the service mode
- 6.1.4 Starting the service mode and setting the service IP address
- 6.1.5 Starting the terminal software / warm start
- 6.2.1 Communication
- 6.2.2 Comparing finger templates
- 6.2.3 1-click installation
- 6.2.4 Configuration
- 6.3.1 Start-up procedure
- 6.5.1 Ethernet settings
- 6.5.2 Host interface
- 6.5.3 Reader settings
- 6.1.1 Service switch
- 7 Operation
- 8 Maintenance
- 9 Packaging / returns
- 10 Disposal
- 11 Index
Product description Manual
14 04043988 - 02/2014 B-eco
3.2.3 Interface
Ethernet interface
• IEEE802.3 compatible 10BASE-T/100BASE-TX Auto sensing, Auto MDIX.
3.2.4 Reader
Supported RFID technologies (depending on design):
• LEGIC prime/advant
• MIFARE Classic/DESFire
• HID iCLASS
• HID Prox
Biometric reader (optional add on reader)
• Compact Biometric Module (CBM) with integrated database for fingerprints.
Depending on the version, the reader has a storage capacity of 500, 3000 or
5000 persons (2 fingers per person).
The reader is available in 2 versions:
− CBM
− CBM-E with enhanced approvals (PIV-IQS with FBI certification and
FIPS 201-approved template evaluation)
• Supported authentication methods:
− Biometric identification
Swipe card reader (optional add on reader)
• Magnetic stripe track 1, 2, 3
• Barcode redlight
• Barcode infrared
RJ45 connection for external reader
• Interface: RS-232C.
• Communication parameters: 9600, 8, N, 1.
• Power supply for the reader: 5 V DC, max. 300 mA over RJ45 connection.