User's Manual

Operation Manual
58 04043988 - 02/2014 B-eco
7.7.2.1 Enroll
This function serves for enrolling new individuals in the local database and for
transmitting templates to B-COMM. The Enroll function can only be performed if a
connection via the BCFTC stream has been established, otherwise the error text "No
FTCS connection!" is displayed (not in standalone operation).
First it is checked if free space is available in the local database. If not, the message
"Local database is full!" is output and an acoustic signal is emitted.
If there is space available in the local database, the user is requested to enter the
template ID. The individual to be newly enrolled is identified by means of the
template ID. The ID length is specified by the "PresetEnroll" parameter in the
system.ini or by parameterized badge definition.
Press “Cancel“ to cancel the entry and return to the menu. Press “OK“ or the E button
to confirm the entry.
If the ID already exists, the message "<Template ID> already exists" is output and an
acoustic signal is emitted.
After entering the template ID, the actual enrollment process starts. Two fingers are
enrolled and three images of each finger are taken.
To do so, each finger has to be briefly placed on the reader window three times.
The current finger (1 or 2) is shown in the display. The number of the image taken at
the moment is shown in brackets. Successful recording of a finger is confirmed by
means of a short acoustic signal. A quality value is specified for each enrollment
process.
Example:
Enrollment
Finger 1 (1/3)
Quality: 103
Press “Cancel“ to cancel the process and return to the menu.
If the finger position is not ideal during enrollment, corresponding symbols are
shown on the display, see chapter 7.4.2.
If the finger is already recorded in the CBM reader database, the error message
"Finger <X> matched! (<Template ID>)" is output and an acoustic signal is emitted.